Wireless CT clamp and Solis inverter

[Moxi]

Does anyone know of a wireless CT clamp that will allow me to interface with the Solis inverter - The big issue being theres no space to get the clamp wire out of the house and there are loads of wires around the area that are at risk of drill strike if we try to widen the existing inlet. The other available wall is over 3ft thick and has 100mm of EWI after that so I am trying to avoid drilling that as it will be a nightmare.

That all leads me to wonder if I can get a wireless CT clamp to send a signal to a receiver located in the battery shed and coupled up to the solis inverter?

Moxi

[marshman]

__

[Countrypaul]

Do you have ethernet in both locations (or could you) as you might be able to use something like: https://thepihut.com/products/industria ... gK_0vD_BwE

I have never tried it, and this is the first such device I found with a search, so not a reccomendation, just an idea!

[Moxi]

Cheers gents I will look at these further and I’m going to remove some of the front door trip at the top to see if there’s a “gap” above the frame that I can make use of to get the wire outside.

Electrician has come today to start the work and will be fitting me a new consumer box with individual rcd breakers and a 16 way rail so I have some spare ways

This will be in about a month due to spring break but that’s ok

Today he pulled the armoured cable and fitted a double outdoor socket for other purposes ( didn’t want to mention Christmas lights this early in the season) Doh!

Moxi