Sorry for reviving an old thread but it seemed appropriate.
I'm trying to decide if I should use Solar Slates for my semi-DIY install. The roofer wants to use Solar Limpets but like others have said they don't seem like the ideal solution for a slate roof. I'm sure he'd be ok with something else if I sort out the details.
Solar slates seem pricey as someone pointed out above but the price does include the hook, which usually cost about £10 each, so approx £19 per solar slate isn't too bad.
Has anyone used them for vertically mounted rails? I assume you'd need an extra L bracket on the hook.
Anyone got any practical advice about using these solar slates?
Many thanks.
Slate hooks vs. limpets?
Re: Slate hooks vs. limpets?
How did you get on @dangermouse?
Finally got new panels installed this week. They used hooks and rails from these people https://www.clenergy.com/product/mounti ... /solarroof, seem to be Australian in origin. Would have looked better with rail end caps. The hooks are concealed by Genius solar flashing which seems to work well.
Finally got new panels installed this week. They used hooks and rails from these people https://www.clenergy.com/product/mounti ... /solarroof, seem to be Australian in origin. Would have looked better with rail end caps. The hooks are concealed by Genius solar flashing which seems to work well.
IMHO a much better result than with limpets as there are no loads on the slates themselves.Petertc wrote: ↑Wed Oct 05, 2022 2:20 pm These people
https://www.geniusroofsolutions.com/products/solarflash
16 x 230W Upsolar panels S Devon, 4kW Steca, 3.9 MWh FITs/yr
8 x 405W Longi panels, 250/60 MPPT, 3.3 MWh/yr
Victron MultiPlus II-GX 48/5000/70-50
10.65 kWh Pylontec Force-L2
zappi 7kW EVCS
Villavent whole-house MVHR
5000l rainwater system
Vaillant 12kW HP
8 x 405W Longi panels, 250/60 MPPT, 3.3 MWh/yr
Victron MultiPlus II-GX 48/5000/70-50
10.65 kWh Pylontec Force-L2
zappi 7kW EVCS
Villavent whole-house MVHR
5000l rainwater system
Vaillant 12kW HP
-
- Posts: 126
- Joined: Wed Oct 05, 2022 11:48 am
Re: Slate hooks vs. limpets?
Still waiting for parts to arrive, but the installer only wants to use limpets. I'm going to go with it otherwise I'll never get anything fitted!
Re: Slate hooks vs. limpets?
Sounds like a reasonable compromise after a long wait, is the work warranted by the fitter?dangermouse wrote: ↑Sat Dec 03, 2022 8:53 am Still waiting for parts to arrive, but the installer only wants to use limpets. I'm going to go with it otherwise I'll never get anything fitted!
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees