Low voltage micro grid tie inverters

Moxi
Posts: 2265
Joined: Sun Oct 31, 2021 3:46 pm

Low voltage micro grid tie inverters

#1

Post by Moxi »

Does anyone know of a micro grid tie inverter that would operate from a single 18v photovoltaic panel?

Moxi
AGT
Posts: 986
Joined: Sat Jan 29, 2022 11:26 am

Re: Low voltage micro grid tie inverters

#2

Post by AGT »

260W Grid Tie Micro Inverter DC18-50V to AC230V Solar Pure Sine Wave Inverter CE

Look this up on eBay…
Moxi
Posts: 2265
Joined: Sun Oct 31, 2021 3:46 pm

Re: Low voltage micro grid tie inverters

#3

Post by Moxi »

Trouble is when you look at the detail on the spec sheets the start up voltage is usually somewhere around 22 to 26v I’m looking for something that would work off a single 18v dc panel

Moxi
AGT
Posts: 986
Joined: Sat Jan 29, 2022 11:26 am

Re: Low voltage micro grid tie inverters

#4

Post by AGT »

Ok then, amazon have one the starts at 10.8 volt.
Same info into Google, comes fitted with Mc4 connectors etc
ALAN/ALAN D

Re: Low voltage micro grid tie inverters

#5

Post by ALAN/ALAN D »

https://www.amazon.co.uk/1600W-Solar-In ... 38&sr=8-57

It says 10.8 volt input.
It also says power 1600W

But when you read the info on the back plate it says. rated output power 150W

CHOCO TEAPOT comes to mind. :oops:
AGT
Posts: 986
Joined: Sat Jan 29, 2022 11:26 am

Re: Low voltage micro grid tie inverters

#6

Post by AGT »

What about using a buck booster converter to increase voltage from panel to above 18volt so more options on the inverters.
Moxi
Posts: 2265
Joined: Sun Oct 31, 2021 3:46 pm

Re: Low voltage micro grid tie inverters

#7

Post by Moxi »

Thanks AGT I’m afraid I’m guilty of looking at one of those chines clones and reading starting voltage in the 20v tragicomic and assuming they were all the same.

Not thought about the buck boost idea thanks

Moxi
Tinbum
Posts: 1117
Joined: Mon May 31, 2021 9:55 pm

Re: Low voltage micro grid tie inverters

#8

Post by Tinbum »

This made me laugh see highlighted box.
Image
85no 58mm solar thermal tubes, 28.5Kw PV, 3x Sunny Island 5048, 2795 Ah (135kWh) (c20) Rolls batteries 48v, 8kWh Growatt storage, 22 x US3000C Pylontech, Sofar ME3000's, Brosley wood burner and 250lt DHW
User avatar
nowty
Posts: 5788
Joined: Mon May 31, 2021 2:36 pm
Location: South Coast

Re: Low voltage micro grid tie inverters

#9

Post by nowty »

AGT wrote: Sun Oct 02, 2022 4:53 pm What about using a buck booster converter to increase voltage from panel to above 18volt so more options on the inverters.
I tried something like this several years ago, I tried to get a single standard panel to run a grid tie inverter requiring about 100V.

It did work but not very well, I think because the max power point tracker of the GTI was running on the voltage booster and not on the panel. So needs some sort of MPPT in between the panel and the voltage booster.
18.7kW PV > 109MWh generated
Ripple 6.6kW Wind + 4.5kW PV > 26MWh generated
5 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 510 m3
Jinx
Posts: 80
Joined: Tue Sep 20, 2022 10:16 pm

Re: Low voltage micro grid tie inverters

#10

Post by Jinx »

AGT wrote: Sun Oct 02, 2022 3:09 pm 260W Grid Tie Micro Inverter DC18-50V to AC230V Solar Pure Sine Wave Inverter CE

Look this up on eBay…
Have you used one of these? Looks dodgy as hell but would be very useful if they are safe and reliable?
Post Reply