Does anyone know if they are approved for DC cabling?
Doesn’t say so on data sheet, just interested in everyone’s point of view
Wagos
Re: Wagos
I'm not aware of any reason they wouldn't be ok with d.c. - or irequire approval for d.c. beyond the voltage limitations
I don't recommend disconnecting the wires under load, but they don't have approval for that a.c. or d.c.
I don't recommend disconnecting the wires under load, but they don't have approval for that a.c. or d.c.
450W hydro-electric
5110W pv
1.3kw Wt2 - not yet producing
6kWh lead acid - maybe 1kwh useable
LiMnCo battery made from 2nd hand hybrid car modules 3.6kwh nominal 24v.
300lt hot water tank and two storage heaters
ASHP Grant Aerona 3 10.5kw and UFH
5110W pv
1.3kw Wt2 - not yet producing
6kWh lead acid - maybe 1kwh useable
LiMnCo battery made from 2nd hand hybrid car modules 3.6kwh nominal 24v.
300lt hot water tank and two storage heaters
ASHP Grant Aerona 3 10.5kw and UFH