Anyone here using Home Assistant or ESP Home?
Re: Anyone here using Home Assistant or ESP Home?
I would definitely recommend taking the opportunity to use a different database for Home Assistant, there's an awful lot more performance available.
Plus, it's easier to use historical statistics to drive some self adjusting automations, etc.
It should be pretty straightforward when using the HA addons
Plus, it's easier to use historical statistics to drive some self adjusting automations, etc.
It should be pretty straightforward when using the HA addons
10x 405W JA Solar panels (4.05kWp) @ 5 degrees
3x 405W Longi panels (1.22kWp) @ 90 degrees
16.5kWh DIY LifePo4 battery
Solis inverter/charger
0.6kW Ripple WT
64kWh Kia E-Niro
3x 405W Longi panels (1.22kWp) @ 90 degrees
16.5kWh DIY LifePo4 battery
Solis inverter/charger
0.6kW Ripple WT
64kWh Kia E-Niro
-
- Posts: 1873
- Joined: Thu Sep 09, 2021 3:42 pm
- Location: North East Dorset
Re: Anyone here using Home Assistant or ESP Home?
I've now managed to do this. The T530 seems to run at between 5W and 6W when running HA, so not a lot more than the Raspberry Pi and USB HDD I'm also running.
25 off 250W Perlight solar panels, installed 2014, with a 6kW PowerOne inverter, about 6,000kWh/year generated
6 off Pylontech US3000C batteries, with a Sofar ME3000SP inverter
6 off Pylontech US3000C batteries, with a Sofar ME3000SP inverter
Re: Anyone here using Home Assistant or ESP Home?
My Pi4 has arived, now waiting for an SD card and an RS485 lead to get started with HA and connecting to my Solar inverter
Solar PV since July '22:
5.6kWp east/west facing
3.6kW Sunsynk hybrid inverter
2x 5.12kWh Sunsynk batteries
1.6kWp Hoymiles East/West facing PV on the man cave
Ripple DW 2kW
Ripple WB 200W
5.6kWp east/west facing
3.6kW Sunsynk hybrid inverter
2x 5.12kWh Sunsynk batteries
1.6kWp Hoymiles East/West facing PV on the man cave
Ripple DW 2kW
Ripple WB 200W
Re: Anyone here using Home Assistant or ESP Home?
Richbee,
Is it too cheeky to ask how much and where you sourced your RPi 4 from please?
Moxi
Is it too cheeky to ask how much and where you sourced your RPi 4 from please?
Moxi
Re: Anyone here using Home Assistant or ESP Home?
I got it from Pimoroni - but they were out of stock again the other day when I looked for RS485 cables.
It was £88 for the 4Gb model, with power supply, case, SD card and HDMI adaptor.
Not very cheap, but not too bad given the lack of supply
Solar PV since July '22:
5.6kWp east/west facing
3.6kW Sunsynk hybrid inverter
2x 5.12kWh Sunsynk batteries
1.6kWp Hoymiles East/West facing PV on the man cave
Ripple DW 2kW
Ripple WB 200W
5.6kWp east/west facing
3.6kW Sunsynk hybrid inverter
2x 5.12kWh Sunsynk batteries
1.6kWp Hoymiles East/West facing PV on the man cave
Ripple DW 2kW
Ripple WB 200W
Re: Anyone here using Home Assistant or ESP Home?
Actually having said that, the 4Gb kit is back in stock again now!! But they dopn't have the Pi on its own, only with the starter kit
Solar PV since July '22:
5.6kWp east/west facing
3.6kW Sunsynk hybrid inverter
2x 5.12kWh Sunsynk batteries
1.6kWp Hoymiles East/West facing PV on the man cave
Ripple DW 2kW
Ripple WB 200W
5.6kWp east/west facing
3.6kW Sunsynk hybrid inverter
2x 5.12kWh Sunsynk batteries
1.6kWp Hoymiles East/West facing PV on the man cave
Ripple DW 2kW
Ripple WB 200W
Re: Anyone here using Home Assistant or ESP Home?
Thanks,
One of my older sons has a 3B that he's going to post to me as he no longer needs it for uni, but if i get bitten by the bug and will no doubt be looking for a 4 in the not-so-distant future, having watched oohtube videos for a few weeks I am beginning to think even I could manage that
Moxi
One of my older sons has a 3B that he's going to post to me as he no longer needs it for uni, but if i get bitten by the bug and will no doubt be looking for a 4 in the not-so-distant future, having watched oohtube videos for a few weeks I am beginning to think even I could manage that
Moxi
Re: Anyone here using Home Assistant or ESP Home?
So I got the USB-M.2 adapter and have just gone to flash the HAOS onto the SSD, and it turns out its only 8GB rather than the 16GB as advertised! Would this be plenty to run HAOS on without issue? Hoping so, so I don't need to chase up the seller for false advertising and send it back, as annoying as it is to only get 8 rather than 16GB, as long as its enough I could live with it.
4kW array w/Fronius | 3.51kW & 3.28kW arrays w/Sunsynk 3.6kW hybrid | 6 x Pylon US3000C
8kW GSHP/MVHR/5kW A2A HP/ Ripple- KH & DW & P4 on the way
8kW GSHP/MVHR/5kW A2A HP/ Ripple- KH & DW & P4 on the way
-
- Posts: 1873
- Joined: Thu Sep 09, 2021 3:42 pm
- Location: North East Dorset
Re: Anyone here using Home Assistant or ESP Home?
Should be OK on 8GB I think. The larger size just allows a larger database size, so allows a longer history period to be saved. I'm pretty sure that 8GB should be fine for a few years worth of data, though.pudding wrote: ↑Sat Nov 19, 2022 9:18 am So I got the USB-M.2 adapter and have just gone to flash the HAOS onto the SSD, and it turns out its only 8GB rather than the 16GB as advertised! Would this be plenty to run HAOS on without issue? Hoping so, so I don't need to chase up the seller for false advertising and send it back, as annoying as it is to only get 8 rather than 16GB, as long as its enough I could live with it.
25 off 250W Perlight solar panels, installed 2014, with a 6kW PowerOne inverter, about 6,000kWh/year generated
6 off Pylontech US3000C batteries, with a Sofar ME3000SP inverter
6 off Pylontech US3000C batteries, with a Sofar ME3000SP inverter
Re: Anyone here using Home Assistant or ESP Home?
Well all up and running, thanks for the help. I had to stop myself at 1am last night from delving deeper after simply getting it installed, bios sorted and booted up and found the ip address so i can log in from my laptop and then play further. It's autodetected quite a few things already, Sonos speakers, 3x Daikin A2A units, Logitech harmony remote hubs, so impressed already! Whats the little tile on the overview page with just my name on it supposed to be/do? I feel this is one hell of a rabbit hole I'm about to fall down! Any essential first steps here?
4kW array w/Fronius | 3.51kW & 3.28kW arrays w/Sunsynk 3.6kW hybrid | 6 x Pylon US3000C
8kW GSHP/MVHR/5kW A2A HP/ Ripple- KH & DW & P4 on the way
8kW GSHP/MVHR/5kW A2A HP/ Ripple- KH & DW & P4 on the way