Idiot's guide to a self build battery

User avatar
Joeboy
Posts: 7782
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Idiot's guide to a self build battery

#531

Post by Joeboy »

nowty wrote: Mon Nov 28, 2022 4:52 pm If they are 3.2V led's then you won't need one.

It only when you run them off say a 5V supply and need to drop the voltage at the running current of the LED.
3.2 to 3.8v
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
User avatar
nowty
Posts: 5573
Joined: Mon May 31, 2021 2:36 pm
Location: South Coast

Re: Idiot's guide to a self build battery

#532

Post by nowty »

They will give your balancer a little exercise. :lol:
16.9kW PV > 107MWh generated
Ripple 6.6kW Wind + 4.5kW PV > 22MWh generated
5 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 510 m3
Marcus
Posts: 249
Joined: Mon Nov 08, 2021 6:25 pm

Re: Idiot's guide to a self build battery

#533

Post by Marcus »

Generally the voltage corresponds to the band-gap - which corresponds to the wavelength (colour); so 1.2ish for near infrared, 2.2ish for red, 3.0 for yellow, etc, with blue and white (blue /uv plus fluorescent) at around 4ish volts.

I doubt they'll last long at 3.8v, and possibly not at 3.6v. If you want them to last, and assuming they're 20mA then
R= (3.65-3.2)/0.02
=22 ohms

They'll also work as a quick indicator of battery soc as with a low battery They'll be a lot dimmer.
450W hydro-electric
5110W pv
1.3kw Wt2 - not yet producing
6kWh lead acid - maybe 1kwh useable
LiMnCo battery made from 2nd hand hybrid car modules 3.6kwh nominal 24v.
300lt hot water tank and two storage heaters
ASHP Grant Aerona 3 10.5kw and UFH
User avatar
Joeboy
Posts: 7782
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Idiot's guide to a self build battery

#534

Post by Joeboy »

Marcus wrote: Mon Nov 28, 2022 5:16 pm Generally the voltage corresponds to the band-gap - which corresponds to the wavelength (colour); so 1.2ish for near infrared, 2.2ish for red, 3.0 for yellow, etc, with blue and white (blue /uv plus fluorescent) at around 4ish volts.

I doubt they'll last long at 3.8v, and possibly not at 3.6v. If you want them to last, and assuming they're 20mA then
R= (3.65-3.2)/0.02
=22 ohms

They'll also work as a quick indicator of battery soc as with a low battery They'll be a lot dimmer.
Cheers Marcus, they are indeed 20mA and I've ordered a pack of 22ohm resistors, cheers guys! When in doubt see thread title! ;)
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
User avatar
Joeboy
Posts: 7782
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Idiot's guide to a self build battery

#535

Post by Joeboy »

nowty wrote: Mon Nov 28, 2022 5:10 pm They will give your balancer a little exercise. :lol:
So they will! Eventually I'll wire each pack with one and I had hoped to see some visual ref re soc.

I can actually walk into and function in the garage on the led's alone! Cool to the touch though. Can't even imagine how bright it would be will all 15 hooked in and no control. :twisted:
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
User avatar
Fintray
Posts: 1439
Joined: Mon May 31, 2021 6:37 pm
Location: Aberdeenshire

Re: Idiot's guide to a self build battery

#536

Post by Fintray »

Joeboy wrote: Mon Nov 28, 2022 5:48 pm
nowty wrote: Mon Nov 28, 2022 5:10 pm They will give your balancer a little exercise. :lol:
So they will! Eventually I'll wire each pack with one and I had hoped to see some visual ref re soc.

I can actually walk into and function in the garage on the led's alone! Cool to the touch though. Can't even imagine how bright it would be will all 15 hooked in and no control. :twisted:
Probably see the glow from my house! :D
3.87kWp PV
10.24kWp PV SolarEdge system
Tesla Powerwall 2
100 x 47mm Navitron tubes (still being installed!) Now likely to be removed for more PV.
MK2 PV router DHW diverter
Morso 5kW WBS
Vaillant AroTherm 10kW ASHP
Nissan Leaf
User avatar
Joeboy
Posts: 7782
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Idiot's guide to a self build battery

#537

Post by Joeboy »

Fintray wrote: Mon Nov 28, 2022 6:12 pm
Joeboy wrote: Mon Nov 28, 2022 5:48 pm
nowty wrote: Mon Nov 28, 2022 5:10 pm They will give your balancer a little exercise. :lol:
So they will! Eventually I'll wire each pack with one and I had hoped to see some visual ref re soc.

I can actually walk into and function in the garage on the led's alone! Cool to the touch though. Can't even imagine how bright it would be will all 15 hooked in and no control. :twisted:
Probably see the glow from my house! :D
:lol: :lol: :D


Image

Image

Image
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
User avatar
Stinsy
Posts: 2640
Joined: Wed Jun 02, 2021 1:09 pm

Re: Idiot's guide to a self build battery

#538

Post by Stinsy »

Joeboy wrote: Mon Nov 28, 2022 6:51 pm
Image
Very festive!
12x 340W JA Solar panels (4.08kWp)
3x 380W JA Solar panels (1.14kWp)
5x 2.4kWh Pylontech batteries (12kWh)
LuxPower inverter/charger

(Artist formally known as ******, well it should be obvious enough to those for whom such things are important.)
User avatar
Joeboy
Posts: 7782
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Idiot's guide to a self build battery

#539

Post by Joeboy »

Stinsy wrote: Mon Nov 28, 2022 7:04 pm
Joeboy wrote: Mon Nov 28, 2022 6:51 pm
Image
Very festive!
Thank you! We have an unassuming 0.8kWh falling to now 0.4kWh coming in from the PV.

I can't stress enough how RE living is a multifaceted beast.

We are running home at about 130W load at most when the freezers are not running. That 0.4kWh coming in is enough to flatline the battery soc and dare I say it actually be charging a little. Classic FM on and a few led lights. This is a great way to live! For anyone generating low figure PV, have another sweep of the house for load vampires.

Image

Load demand of Classic FM! :shock:
Image

Minus 2 here with lawn full frozen. Not bothered. :lol:

Image
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Bugtownboy
Posts: 943
Joined: Tue Jun 01, 2021 12:35 pm

Re: Idiot's guide to a self build battery

#540

Post by Bugtownboy »

Snap !

OK, not -2, but +5 and a total grey out :evil:

Radio on, nice book, supper plipping away. Lovely.
Image
Post Reply