Didn’t realise you got 200 amp version, so thought I would share, would make ideal bus bars for batteries due to cable capacity and the fact they are insulated.
Take the cover off and spray them red and black
Battery Connectors - Insulated
Re: Battery Connectors - Insulated
Or smaller ones can be used for adding parallel strings to charge controllers as here in Nowty Towers.
These from screwfix take both positive and negative in a single housing and can take 100A but I'm only using a fraction of that.
These from screwfix take both positive and negative in a single housing and can take 100A but I'm only using a fraction of that.
18.7kW PV > 109MWh generated
Ripple 6.6kW Wind + 4.5kW PV > 27MWh generated
6 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 510 m3
Ripple 6.6kW Wind + 4.5kW PV > 27MWh generated
6 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 510 m3
Re: Battery Connectors - Insulated
Never been a fan of the 2 pole version in the one enclosure!
In all the years I’ve never seen a 200 amp version so handy at the cost
In all the years I’ve never seen a 200 amp version so handy at the cost