This ‘spider’ crane enables an offshore wind turbine to virtually build itself
isn't quite true, but
Once an offshore wind turbine’s tower is standing, the WindSpider crane is installed. The crane uses the tower as support to install other turbine components. Having the turbine tower as a support structure eliminates relative motion between the crane and the turbine.
Its Dolly Crane, which slides up and down the cage, will lift and position the nacelle components, and WindSpider has also designed a Blade Tool, which also travels up and down, keeping the blade steady while the root end is connected to the turbine’s hub.
Unlike conventional cranes, WindSpider’s self-erecting design has no weight or height limitations, so WindSpider says it will be robust in the most challenging and windy environments. It’s compatible with both fixed and floating wind turbines.
WindSpider says its crane could revolutionize the industry
A good firm to have money in!
2.0 kW/4.62 MWh pa in Ripples, 4.5 kWp W-facing pv, 9.5 kWh batt
30 solar thermal tubes, 2MWh pa in Stockport, plus Congleton and Kinlochbervie Hydros,
Most travel by bike, walking or bus/train. Veg, fruit - and Bees!