That is exactly what the Ecoflow system that started this thread viewtopic.php?f=11&t=2272 was meant to do. It was quickly withdrawn from sale in UK but is still available in Europe. It is a bit clunky and you do (did?) need to use their batteries, 600W or 800W micro inverter depending on which country you are in. The local B&Q type store has them.
Plug-in solar devices.
Re: Plug-in solar devices.
Living the dream in Austria.
Uk property 3.75kW PV linked to 3kW inverter.
Uk property 3.75kW PV linked to 3kW inverter.
Re: Plug-in solar devices.
Depends on what you are plugging into. The regs apply only to "national grid connected installations".
Two alternative solutions would be nationalise the national grid or decentralise and build yer own.
I huesta wonder why the things we use everyday aren't thought in schools...energy production, water harvesting, collectivism, food production, shelter making, social architure, plasma.
It seems state education isn't interested in advocating self-reliance...odd..artificial demand maybe...
Seems normal we pay for water now...oxygen will be next I suppose...
You can add aunty islanding to any device by using a contactor with the coil powered by the grid. Grids goes down, coil de-energises, contactor opens, aux genset isolated You can build it for less than £10. It's easy peasy...that excuse is as valid as the "grid needs upgrading"...decentralised power can be throttled and or used locally. I know this because I've been implementing it for over a decade...but then the grid's been doing it ever since they synchronised a second generator to the network....foxes guarding the henhouse I'm afraid...
Re: Plug-in solar devices.
Spot on, that was part of my ponderings. Which out loud were:-chris_n wrote: ↑Sat Jul 05, 2025 6:41 pmThat is exactly what the Ecoflow system that started this thread viewtopic.php?f=11&t=2272 was meant to do. It was quickly withdrawn from sale in UK but is still available in Europe. It is a bit clunky and you do (did?) need to use their batteries, 600W or 800W micro inverter depending on which country you are in. The local B&Q type store has them.
Step 1 - If you can have 800W (AC) of PV going into a socket, then
Step 2 - Does it matter if it goes via a battery, so long as the 800W limit is maintained, then
Step 3 - Can you cut out the PV part, and jump to an AC grid charged battery, that discharges back to the house circuit at 800W.
I know very little about electrickery, and all of the potential ramifications, but I'm guessing that those 3 scenarios are pretty much the same as regards DNO concerns/issues? So could open the door to some cheap and easy PV, and maybe some simplified storage, at a not unreasonable amount of power.
So much potential, for so many, hope it doesn't take a couple of years to decide/approve.
8.7kWp PV [2.12kWp SSW + 4.61kWp ESE PV + 2.0kWp WNW PV]
Two BEV's.
Two small A2A heatpumps.
20kWh Battery storage.
Two BEV's.
Two small A2A heatpumps.
20kWh Battery storage.
Re: Plug-in solar devices.
Not true. (I didn't read the rest).
12x 340W JA Solar panels (4.08kWp)
3x 380W JA Solar panels (1.14kWp)
6x 2.4kWh Pylontech batteries (14.4kWh)
LuxPower inverter/charger
(Artist formally known as ******, well it should be obvious enough to those for whom such things are important.)
3x 380W JA Solar panels (1.14kWp)
6x 2.4kWh Pylontech batteries (14.4kWh)
LuxPower inverter/charger
(Artist formally known as ******, well it should be obvious enough to those for whom such things are important.)
Re: Plug-in solar devices.
You'd be best to hardwire it. You'll melt a 13Amp eventually.
Matter to whom?
The electrons...not really
You can do it seemlessly while maintaining proportional or entire solar input. Anything called a hybrid inverter can do this.
The main barrier to entry is conceptual criminality for donating power to your fellow humans by the owners and orchestrators of the national grid without their oversight, accountabliilty and mandated constraints.
The technical difficulty is minor to overcome.
If you are registered as a micro-generator with a grid compliant battery then you can export from that battery anything you want from any charger you have.
It's a lot like plumbing. There's two issues.Mart wrote: ↑Sun Jul 06, 2025 8:19 am I know very little about electrickery, and all of the potential ramifications, but I'm guessing that those 3 scenarios are pretty much the same as regards DNO concerns/issues? So could open the door to some cheap and easy PV, and maybe some simplified storage, at a not unreasonable amount of power.
One is technical. Can you do it? Yes.
The other is societal.Will the DNO let you? Depends.
I mostly only deal with the technical end of things.
Power to the people, one could say.
I approve. On you go.
If you start with an off-grid system an use everything you produce then no problem. Pick a room in the house and make it 24V or whatever.
The main "issue" arises when you reverse feed a meter. You can avoid this by
Having more load than solar.
Using an off-grid setup with a mains powered battery charger to buffer shortfall.
An AC coupled system with diversion load control.
An AC coupled system set to "import only"


Re: Plug-in solar devices.
Matter to the DNO, the whole point as I understand it, regarding permission for the addition of a grid-tied SSEG to the local network, without the need for any approval.
As I understand it, much of Europe has this permission, the UK doesn't. I'm not saying the UK is wrong, but if it revues the situation, and decides that these upto 800W(AC) PV systems can be allowed, then my question was to follow the logic, and suggest/ask if that leads to other varieties of 800W(AC) plug in devices.
8.7kWp PV [2.12kWp SSW + 4.61kWp ESE PV + 2.0kWp WNW PV]
Two BEV's.
Two small A2A heatpumps.
20kWh Battery storage.
Two BEV's.
Two small A2A heatpumps.
20kWh Battery storage.