Thermal Store installation.

Post Reply
ecogeorge
Posts: 402
Joined: Sun Oct 31, 2021 7:23 pm
Location: Gloucestershire

Thermal Store installation.

#1

Post by ecogeorge »

Moving on with major plumbing changes .....
Time to start installing a thermal store i purchased over a year ago on an auction site.......
Does anyone recognise the make/model.
Seem to remember its 210 litre and maybe a Telford ?? No markings........
Need to blow down each pipe and identify the ports..........
Have large boiler stove (not yet installed), Heat pump (installed to summer blow up pool only) , Solic immersion diverter (heats water in current indirect cylider) and Gas boiler (on last legs condemmed -may connect for short term .Will not replace if fails).
Plan is DHW and wet radiators with boiler stove , topped up by excess PV and Heatpump.
George
Image
1750w Vertical PV micro inverters
3800w almost horizontal/south
Aarrow Becton 7 Woodburner
Dream 3kw ASHP only connected to summer Pool.
Allotment heavy clay.
1.784kw Kirk Hill
0.875kw Derril Water
0.2kwWhitelaw Brae
1kw Harlow Hydro.
User avatar
Joeboy
Posts: 8148
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Thermal Store installation.

#2

Post by Joeboy »

Looking forward to seeing this project. Sorry for a daft question. Are you adding this to an existing tank system or replacing? Cheers!
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
ecogeorge
Posts: 402
Joined: Sun Oct 31, 2021 7:23 pm
Location: Gloucestershire

Re: Thermal Store installation.

#3

Post by ecogeorge »

Replacing .........
It's a long story. Room contained only toilet (upstairs) and existing DHW is vented indirect in bathroom ! 1930's house.
Have toilet downstairs (big void understairs now converted) so water tank is moving into x toilet upstairs.
Then we can fit a toilet in the bathroom.
Only a case of installing 2 x 28mm from new woodburner/heat leak rads/moving bath and sink/new toilet/connecting heat pump/connecting gas /connecting Solic divert ........what could possibly go wrong ?
George.
1750w Vertical PV micro inverters
3800w almost horizontal/south
Aarrow Becton 7 Woodburner
Dream 3kw ASHP only connected to summer Pool.
Allotment heavy clay.
1.784kw Kirk Hill
0.875kw Derril Water
0.2kwWhitelaw Brae
1kw Harlow Hydro.
User avatar
Joeboy
Posts: 8148
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Thermal Store installation.

#4

Post by Joeboy »

ecogeorge wrote: Thu Mar 14, 2024 3:43 pm Replacing .........
It's a long story. Room contained only toilet (upstairs) and existing DHW is vented indirect in bathroom ! 1930's house.
Have toilet downstairs (big void understairs now converted) so water tank is moving into x toilet upstairs.
Then we can fit a toilet in the bathroom.
Only a case of installing 2 x 28mm from new woodburner/heat leak rads/moving bath and sink/new toilet/connecting heat pump/connecting gas /connecting Solic divert ........what could possibly go wrong ?
George.
I enjoy plumbing, reads like a bit more than a mornings work. SWMBO has an eye on me ripping out downstairs bathroom and bath, replacing with walk in shower stall. Camelot plumbers support group maybe? :D
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Post Reply