I bought little led lanterns and converted the existing units. I liked the pyramid shape of the s/s steel housings.Oldgreybeard wrote: ↑Thu Sep 29, 2022 6:07 pm The lights I fitted under our wall mounted kitchen units, are just cheap LED strips from eBay, with a 12V power supply tucked away in the cabinets. They are wired using these wireless switches (have loads of these, they are brilliant): https://www.quinetic.co.uk/
I hid the strips from direct view by just fitting a matching oak trim (left over bit of oak door shut strip (sure there's a proper name for it) glued along the front edge of the underside of the wall units, with the LED strip stuck behind it, out of sight. Works a treat, and instead of the very power hungry 5050 or 5630 LED strip I used outside, for the kitchen I used the much lower power 3528 strip, that only draws about 1W per metre or so.
Dubai Lamps
Re: Dubai Lamps
15kW PV SE, VI, HM, EN
42kWh LFPO4 storage
73kWh V2H EV
7kW ASHP
200ltr HWT.
3G
Deep insulation, air leak ct'd home
WBSx2
Low energy bulbs
Veg patches & fruit
42kWh LFPO4 storage
73kWh V2H EV
7kW ASHP
200ltr HWT.
3G
Deep insulation, air leak ct'd home
WBSx2
Low energy bulbs
Veg patches & fruit
-
- Posts: 1873
- Joined: Thu Sep 09, 2021 3:42 pm
- Location: North East Dorset
Re: Dubai Lamps
Lot to be said for aesthetics outbidding ultimate energy efficiency, especially if marital harmony is to be maintained! This is a photo of the LED strip arrangement I came up with, in case it is of any use to anyone else (the LEDs are 12V, so safe enough to DIY). This is a front view, showing the bit of oak trim used to hide the LED strip:Joeboy wrote: ↑Thu Sep 29, 2022 6:25 pmI bought little led lanterns and converted the existing units. I liked the pyramid shape of the s/s steel housings.Oldgreybeard wrote: ↑Thu Sep 29, 2022 6:07 pm The lights I fitted under our wall mounted kitchen units, are just cheap LED strips from eBay, with a 12V power supply tucked away in the cabinets. They are wired using these wireless switches (have loads of these, they are brilliant): https://www.quinetic.co.uk/
I hid the strips from direct view by just fitting a matching oak trim (left over bit of oak door shut strip (sure there's a proper name for it) glued along the front edge of the underside of the wall units, with the LED strip stuck behind it, out of sight. Works a treat, and instead of the very power hungry 5050 or 5630 LED strip I used outside, for the kitchen I used the much lower power 3528 strip, that only draws about 1W per metre or so.
and this is a slightly awkward underside view, showing the self-adhesive LED strip stuck to the base of the cabinets behind the oak trim:
25 off 250W Perlight solar panels, installed 2014, with a 6kW PowerOne inverter, about 6,000kWh/year generated
6 off Pylontech US3000C batteries, with a Sofar ME3000SP inverter
6 off Pylontech US3000C batteries, with a Sofar ME3000SP inverter