Any simplified rainwater designs for loo's nowadays?

Rain water and grey water harvesting and distribution systems
Mr Gus
Posts: 3813
Joined: Sun Jun 13, 2021 9:42 pm
Location: Tofu eaters paradise (harrumph)

Any simplified rainwater designs for loo's nowadays?

#1

Post by Mr Gus »

Owt changed?

I'd like to be able to divert some roof run off (near a loo) to my downstairs WC but have a feeling the same old grey water near a potable is still a no-no? ..considering when this was last discussed on a forum in a galaxy far far away have things changed in light of climate urgency?
1906 ripplewatts @wind Turb-ine-erry
It's the wifes Tesla 3 (she lets me wash it)
Leaf 24
Celotex type insulation stuffed most places
Skip diver to the gentry
Austroflamm WBS
A finger of solar + shed full more
User avatar
Stinsy
Posts: 2834
Joined: Wed Jun 02, 2021 1:09 pm

Re: Any simplified rainwater designs for loo's nowadays?

#2

Post by Stinsy »

As far as I know BS8525-1:2010 is still in effect, unchanged. My understanding is that so long as any taps are labelled all is good. I don’t think you’re allowed to use grey water for hand washing, that is a dealbreaker for many toilet use-cases because the need to run portable and grey makes it too expensive.
12x 340W JA Solar panels (4.08kWp)
3x 380W JA Solar panels (1.14kWp)
5x 2.4kWh Pylontech batteries (12kWh)
LuxPower inverter/charger

(Artist formally known as ******, well it should be obvious enough to those for whom such things are important.)
User avatar
nowty
Posts: 5773
Joined: Mon May 31, 2021 2:36 pm
Location: South Coast

Re: Any simplified rainwater designs for loo's nowadays?

#3

Post by nowty »

I installed a completely separate pressure pumped plumbing supply to my toilets and outdoor garden taps. If it goes wrong, I can re-connect the upstairs toilet by physically disconnecting the grey water pipe and reinstating the original potable water supply. I think that is enough to abide by the regulations as the supplies remain completely seperated.

Maybe I need to label the outdoor taps as non potable water. :?:

Image

Image
18.7kW PV > 109MWh generated
Ripple 6.6kW Wind + 4.5kW PV > 26MWh generated
5 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 510 m3
Mr Gus
Posts: 3813
Joined: Sun Jun 13, 2021 9:42 pm
Location: Tofu eaters paradise (harrumph)

Re: Any simplified rainwater designs for loo's nowadays?

#4

Post by Mr Gus »

If that is deemed acceptable then that is indeed doable, no cited concerns about interchanging the two from a microbial aspect?
(I was under the impression there would need to be two water inlets & proximity of one to the other was part of the concern? ..hope i'm wrong)
1906 ripplewatts @wind Turb-ine-erry
It's the wifes Tesla 3 (she lets me wash it)
Leaf 24
Celotex type insulation stuffed most places
Skip diver to the gentry
Austroflamm WBS
A finger of solar + shed full more
User avatar
nowty
Posts: 5773
Joined: Mon May 31, 2021 2:36 pm
Location: South Coast

Re: Any simplified rainwater designs for loo's nowadays?

#5

Post by nowty »

The main issue is to prevent backflow from the greywater system to the potable system which is what I have implemented.

Good simple info found here.
https://www.eswater.co.uk/globalassets/ ... advice.pdf

And some other info from the Environment Agency, found here,
https://sswm.info/sites/default/files/r ... 0Users.pdf

Looks like I am OK, apart from needing to colour code the pipes and add various labels to things.

Another job to add to the long term "To Do" list. :cry:
18.7kW PV > 109MWh generated
Ripple 6.6kW Wind + 4.5kW PV > 26MWh generated
5 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 510 m3
Mr Gus
Posts: 3813
Joined: Sun Jun 13, 2021 9:42 pm
Location: Tofu eaters paradise (harrumph)

Re: Any simplified rainwater designs for loo's nowadays?

#6

Post by Mr Gus »

Thanks nowty, I'm currently clearing my back garden (Bee & blackbird heaven) as we gave it over when the local bird songbird populace went into decline, having seemed to recover over a 10 year period i'm hacking it back to its original purpose which will likely involve a few 000 litres of water storage my loo is fittingly close & as it is my own personal jump off point for a visit to the spice islands I don't think i'll get complaints :lol:
1906 ripplewatts @wind Turb-ine-erry
It's the wifes Tesla 3 (she lets me wash it)
Leaf 24
Celotex type insulation stuffed most places
Skip diver to the gentry
Austroflamm WBS
A finger of solar + shed full more
User avatar
Joeboy
Posts: 8081
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Any simplified rainwater designs for loo's nowadays?

#7

Post by Joeboy »

Remotely related. We used toilets similar to these in Japan. Have a dump, wash hands, hand water fills cistern for next customer.

https://www.wholesaledomestic.com/combi ... zwQAvD_BwE
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
User avatar
nowty
Posts: 5773
Joined: Mon May 31, 2021 2:36 pm
Location: South Coast

Re: Any simplified rainwater designs for loo's nowadays?

#8

Post by nowty »

Joeboy wrote: Fri Jul 09, 2021 11:11 pm Remotely related. We used toilets similar to these in Japan. Have a dump, wash hands, hand water fills cistern for next customer.

https://www.wholesaledomestic.com/combi ... zwQAvD_BwE
Wow, thats such a good idea and so simple, especially in terms of plumbing.
18.7kW PV > 109MWh generated
Ripple 6.6kW Wind + 4.5kW PV > 26MWh generated
5 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 510 m3
User avatar
Stinsy
Posts: 2834
Joined: Wed Jun 02, 2021 1:09 pm

Re: Any simplified rainwater designs for loo's nowadays?

#9

Post by Stinsy »

I saw those in Japan. Seemed elegantly efficient.
12x 340W JA Solar panels (4.08kWp)
3x 380W JA Solar panels (1.14kWp)
5x 2.4kWh Pylontech batteries (12kWh)
LuxPower inverter/charger

(Artist formally known as ******, well it should be obvious enough to those for whom such things are important.)
User avatar
Joeboy
Posts: 8081
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Any simplified rainwater designs for loo's nowadays?

#10

Post by Joeboy »

Stinsy wrote: Sat Jul 10, 2021 6:45 am I saw those in Japan. Seemed elegantly efficient.
Many kinds.

https://www.familyhandyman.com/article/ ... ves-water/
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Post Reply