Lux power inverter parts

Post Reply
Marcus
Posts: 241
Joined: Mon Nov 08, 2021 6:25 pm

Lux power inverter parts

#1

Post by Marcus »

Got a customer who has a setup of lux power inverters with pylontech batteries. One of the inverters ( connected to a stack of 6 pylontecs) has badly fried the positive battery connection post - sadly i don't have a picture handy. The customer doesn't seem to be having much luck with the original installers so asked me if i could sort it out. :roll:

The pylontechs have all gone dark so I'm hoping they self protect on discharge, and according to the customer the inverter is still 'on'.

Obviously i need to look at it, but assuming it just needs the battery connector (and cable end) i was wondering if anyone knew what these post terminals are called or where to get them?

I've done a little googling but not seen anything that matches - unless you get the right term in the search Google can be a bit hit and miss.
450W hydro-electric
5110W pv
1.3kw Wt2 - not yet producing
6kWh lead acid - maybe 1kwh useable
LiMnCo battery made from 2nd hand hybrid car modules 3.6kwh nominal 24v.
300lt hot water tank and two storage heaters
ASHP Grant Aerona 3 10.5kw and UFH
Inskip75
Posts: 66
Joined: Thu Jun 10, 2021 6:42 am

Re: Lux power inverter parts

#2

Post by Inskip75 »

I think they are called Amphenol Surlok plus? They look similar.
5.6kW PV
0.8kW WT1 and 1.2kW WT2
9.6kWh batteries
3.5kW+2.5kW ASHP
Zappi
Seat Mii Electric
Marcus
Posts: 241
Joined: Mon Nov 08, 2021 6:25 pm

Re: Lux power inverter parts

#3

Post by Marcus »

Inskip75 wrote: Mon Apr 10, 2023 12:00 pm I think they are called Amphenol Surlok plus? They look similar.
Thanks, I'll have another Google. :)
450W hydro-electric
5110W pv
1.3kw Wt2 - not yet producing
6kWh lead acid - maybe 1kwh useable
LiMnCo battery made from 2nd hand hybrid car modules 3.6kwh nominal 24v.
300lt hot water tank and two storage heaters
ASHP Grant Aerona 3 10.5kw and UFH
Marcus
Posts: 241
Joined: Mon Nov 08, 2021 6:25 pm

Re: Lux power inverter parts

#4

Post by Marcus »

That certainly looks right :) but there do seem to be a large number of variations - too many to order in the parts before i go and look at the inverter, alas (the customer isn't that close ).
450W hydro-electric
5110W pv
1.3kw Wt2 - not yet producing
6kWh lead acid - maybe 1kwh useable
LiMnCo battery made from 2nd hand hybrid car modules 3.6kwh nominal 24v.
300lt hot water tank and two storage heaters
ASHP Grant Aerona 3 10.5kw and UFH
Post Reply