Had to cut bolt off, then stud extractor broken in hole
Need to remove the lower piece where the wire comes out to get in a drill bench.
I have removed Allen key and have 3/4mm movement up and down will not shift.
Can see no circlip up the end where the wire protrudes.
Nothing to see in where slip rings are.
Nothing hidden under rectifiers
Tried gentle tap with hammer but nope!
Any one any experience?
![Image](https://i.postimg.cc/w1jZd0nQ/IMG-20240504-171953-318.jpg)
![Image](https://i.postimg.cc/F102bfj3/IMG-20240504-172012-614.jpg)
![Image](https://i.postimg.cc/xcRh7Wpd/IMG-20240504-172022-264.jpg)
![Image](https://i.postimg.cc/z3W1d21L/IMG-20240504-172032-574.jpg)