While not everyone understands the correct ways of measuring / expressing power and energy, they have no hope if we don’t use the correct units.
If someone points out an error we should learn and make corrections where necessary, lest we confuse someone down the line.
EV charger install pre-check 101 (with video) for dummies
Re: EV charger install pre-check 101 (with video) for dummies
12x 340W JA Solar panels (4.08kWp)
3x 380W JA Solar panels (1.14kWp)
5x 2.4kWh Pylontech batteries (12kWh)
LuxPower inverter/charger
(Artist formally known as ******, well it should be obvious enough to those for whom such things are important.)
3x 380W JA Solar panels (1.14kWp)
5x 2.4kWh Pylontech batteries (12kWh)
LuxPower inverter/charger
(Artist formally known as ******, well it should be obvious enough to those for whom such things are important.)
Re: EV charger install pre-check 101 (with video) for dummies
5 people asked & five "no idea" results.
1906 ripplewatts @wind Turb-ine-erry
It's the wifes Tesla 3 (she lets me wash it)
Leaf 24
Celotex type insulation stuffed most places
Skip diver to the gentry
Austroflamm WBS
A finger of solar + shed full more
It's the wifes Tesla 3 (she lets me wash it)
Leaf 24
Celotex type insulation stuffed most places
Skip diver to the gentry
Austroflamm WBS
A finger of solar + shed full more
Re: EV charger install pre-check 101 (with video) for dummies
Nah, it's 3 watts (I just remembered to check) ..good enough, miles off (another contextually incorrect terminology) the rolec wastage.
What does impress me with zappi is the in-house design & assembly (no idea about component sourcing) ..all under their control.
Very easy to change your tethered unit for another "head" if needed, plus cheap spares cost to keep it ticking over.
(There is also, commendably very minimal price difference between tethered & untethered, unlike other companies)
1906 ripplewatts @wind Turb-ine-erry
It's the wifes Tesla 3 (she lets me wash it)
Leaf 24
Celotex type insulation stuffed most places
Skip diver to the gentry
Austroflamm WBS
A finger of solar + shed full more
It's the wifes Tesla 3 (she lets me wash it)
Leaf 24
Celotex type insulation stuffed most places
Skip diver to the gentry
Austroflamm WBS
A finger of solar + shed full more
Re: EV charger install pre-check 101 (with video) for dummies
I have just seen that SMA have brought a charger out- not looked at the details yet.
85no 58mm solar thermal tubes, 28.5Kw PV, 3x Sunny Island 5048, 2795 Ah (135kWh) (c20) Rolls batteries 48v, 8kWh Growatt storage, 22 x US3000C Pylontech, Sofar ME3000's, Brosley wood burner and 250lt DHW
Re: EV charger install pre-check 101 (with video) for dummies
Don't forget to post details when it happens.
I've recently found a replacement under warranty zappi mk2 unit with a suspected basic failure local to me that is worth a punt on which is why I was looking over units "again" just waiting for details as to the passcode being present (it's already removed from property & owners) otherwise potentially locked out & useless.
Now to find some cheap SWA.
I've recently found a replacement under warranty zappi mk2 unit with a suspected basic failure local to me that is worth a punt on which is why I was looking over units "again" just waiting for details as to the passcode being present (it's already removed from property & owners) otherwise potentially locked out & useless.
Now to find some cheap SWA.
1906 ripplewatts @wind Turb-ine-erry
It's the wifes Tesla 3 (she lets me wash it)
Leaf 24
Celotex type insulation stuffed most places
Skip diver to the gentry
Austroflamm WBS
A finger of solar + shed full more
It's the wifes Tesla 3 (she lets me wash it)
Leaf 24
Celotex type insulation stuffed most places
Skip diver to the gentry
Austroflamm WBS
A finger of solar + shed full more
Re: EV charger install pre-check 101 (with video) for dummies
I have and its about £1,500 and I that's before fitting !
Only advantage for me is that it can be integrated into my Sunny Manager but would not actually do anything special for me anyway.
18.7kW PV > 109MWh generated
Ripple 6.6kW Wind + 4.5kW PV > 27MWh generated
6 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 520 m3
Ripple 6.6kW Wind + 4.5kW PV > 27MWh generated
6 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 520 m3
Re: EV charger install pre-check 101 (with video) for dummies
Well I didn't win the Zappi mk2 so am still looking, have found a few recently installed but changed jobs "no longer needed" units since then, so have been checking out the technical data.
At this point I can only say regardless of how much video praise was heaped on the brand "Hype" rvolt, by Artisan Electrics, stay away, based on my experience with them.
Not even if it was free.
At this point I can only say regardless of how much video praise was heaped on the brand "Hype" rvolt, by Artisan Electrics, stay away, based on my experience with them.
Not even if it was free.
1906 ripplewatts @wind Turb-ine-erry
It's the wifes Tesla 3 (she lets me wash it)
Leaf 24
Celotex type insulation stuffed most places
Skip diver to the gentry
Austroflamm WBS
A finger of solar + shed full more
It's the wifes Tesla 3 (she lets me wash it)
Leaf 24
Celotex type insulation stuffed most places
Skip diver to the gentry
Austroflamm WBS
A finger of solar + shed full more