Hi all.

Introductions

Please introduce yourself. This lets other members know who you are, we try to be a friendly community. It also helps to keep the forum free from spam bots by proving you are human (or at least sentient).
Post Reply
electric-alfie
Posts: 1
Joined: Sun Oct 20, 2024 9:02 pm

Hi all.

#1

Post by electric-alfie »

Hi all, I am looking for advice on adding a inverter and linking it to a battery in our home.

Not sure what to ask an electrician to quote for and not sure if i will be able to find an electrician who will just supply the feed to the inverter location, or will need to find someone to supply and install the inverter as well. I also not sure if we want to supply the whole house and use the inverter / batteries when the kwh rate is at it highest, or have another circuit setup just for the inverter circuits such as my home office and a couple of new sockets in the kitchen,these will be used for airfryer etc . Looking at G98 certification., I have used victron before but if i go for a 48/5000 that will be a G99. We are in derbyshire.
richbee
Posts: 590
Joined: Tue Apr 19, 2022 3:39 pm
Location: Northumberland

Re: Hi all.

#2

Post by richbee »

Hi there, welcome to the forum.
I'm sure you'll get lots of good advice here.

My thoughts as a non-expert are that if you're going to the trouble of fitting an inverter and batteries, it is worth feeding the whole house, and getting enough batteries to meet your usual daily needs, so you can have a cheap rate TOU tariff, eg. Octopus flux, to charge the batteries overnight & then use the stored energy during the day.

If you get the whole system fitted by a company, the whole system is vat free - on the other hand, lots of people on here have bought batteries from China for less and installed themselves.
Also, the mcs certification and g98 approval is easier if done by a registered company.

It's also good to get an idea of options for future expansion too, eg. Solar pv, EV charger, so you don't make life more complicated for your future self.
I know I wished I'd started out asking questiins here before I had my solar & battery system fitted!
Solar PV since July '22:
5.6kWp east/west facing
3.6kW Sunsynk hybrid inverter
2x 5.12kWh Sunsynk batteries
1.6kWp Hoymiles East/West facing PV on the man cave
Ripple DW 2kW
Ripple WB 200W
User avatar
Fintray
Posts: 1488
Joined: Mon May 31, 2021 6:37 pm
Location: Aberdeenshire

Re: Hi all.

#3

Post by Fintray »

Welcome to the forum Alfie.

I did a similar system to what you are considering with Victron Multiplus and batteries from China, the system runs the whole house.
3.87kWp PV
10.24kWp PV SolarEdge system
Tesla Powerwall 2
100 x 47mm Navitron tubes (still being installed!) Now likely to be removed for more PV.
MK2 PV router DHW diverter
Morso 5kW WBS
Vaillant AroTherm 10kW ASHP
Nissan Leaf
Ken
Posts: 496
Joined: Mon Jul 26, 2021 10:07 am

Re: Hi all.

#4

Post by Ken »

Welcome.
Not much background detail there.
These days all what you require is fitted in one box-inverter,batteries, switch to islanding and charging on TOU (Time of Use) tariff. The Tesla powerwall does this but there is cheaper alternatives i am sure.
User avatar
nowty
Posts: 5672
Joined: Mon May 31, 2021 2:36 pm
Location: South Coast

Re: Hi all.

#5

Post by nowty »

electric-alfie, I am reading your email as if you don't currently have any Solar PV, are not looking to add any Solar PV and just want a Inverter and battery function to take advantage of TOU tariffs ?

If so, several on here have done just that, but if your thinking of adding some Solar PV in the future then fitting a Hybrid inverter would be advised as they can take either or both Solar PV and Batteries.
16.9kW PV > 108MWh generated
Ripple 6.6kW Wind + 4.5kW PV > 24MWh generated
5 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 510 m3
Post Reply