Raised beds

Share your growing tips
Post Reply
Stan
Posts: 377
Joined: Fri Jun 11, 2021 10:45 am

Raised beds

#1

Post by Stan »

We’ve been using wooden raised beds for a long time but eventually they rotted badly. The ones made from 18” concrete blocks have lasted much better although with a bit of subsidence. I fell in a big way for steel corrugated raised beds when seeing them on ‘Self-sufficient me’ on youtube.
The one that I bought is designed to stand 800mm high which seemed a good working height. However, after consideration, I assembled it at 400mm high and about twice as long (4000mm).

Image

I’m really pleased with it. It’s now planted up with strawberries and I do keep it weed-free and runner-free.
One mod that I made was to fit 3 dexion frames at intermediate positions to increase stability.
The smaller wooden bed is made from some 9” x 3” oak sections enjoying a second life, to see how that fares.


Image

This later photo taken today shows the raised beds made from 6” x 2” plastic sections which are bedded on lightweight concrete blocks. This structure is not going to rot. However, the plastic sections are a lot more flexible tha timber sections and expansion causes them to spread under the lateral soil load and they even walk a bit. Also the plastic costs a fortune. I was given it but it would have cost me say £500.
User avatar
Sunrisemike
Posts: 115
Joined: Tue Jun 01, 2021 6:01 pm
Location: Osborne Bay

Re: Raised beds

#2

Post by Sunrisemike »

A few years ago I made some boxes out of a fallen cedar that I had planked up with my planking chain saw. I made the sides taller so that I din't have to bend over so far!


Image
Off grid.
3.9 kw solar panels
6 x solar collectors
40 kWh rolls batteries
Orligno wood gasification boiler
2000 litre storage tank
Lister generator...
Stan
Posts: 377
Joined: Fri Jun 11, 2021 10:45 am

Re: Raised beds

#3

Post by Stan »

That looks really good Mike, especially in cedar.
AE-NMidlands
Posts: 2024
Joined: Wed Jun 02, 2021 6:10 pm

Re: Raised beds

#4

Post by AE-NMidlands »

We tried them at our allotment where the soil was very heavy, but found that a) we couldn't keep them moist enough for good growth and b) the red ants moved in and you couldn't do anything without getting quite badly "stung!"
A
2.0 kW/4.62 MWh pa in Ripples, 4.5 kWp W-facing pv, 9.5 kWh batt
30 solar thermal tubes, 2MWh pa in Stockport, plus Congleton and Kinlochbervie Hydros,
Most travel by bike, walking or bus/train. Veg, fruit - and Bees!
User avatar
Joeboy
Posts: 8085
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Raised beds

#5

Post by Joeboy »

We have found that overlayering with grass clippings or Autumn leaves provide an excellent moisture barrier to keep it all in.Worth a Google for lasagna gardening.
Image
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
User avatar
nowty
Posts: 5778
Joined: Mon May 31, 2021 2:36 pm
Location: South Coast

Re: Raised beds

#6

Post by nowty »

Stan wrote: Sat Jun 12, 2021 10:14 am That looks really good Mike, especially in cedar.
I was up in the NW of England last week visiting my parents and doing some DIY work on their property. I noticed a wooden clothes line prop leaning against the garage. I said to my mum, "that can't be the same one you had made at Jewsons over 40 years ago ?"

She replied, "yes it is".

I remember going with her and she was offered one in pine or cedar. The wood cutter recommended the cedar one as far more quality but was more expensive. She chose the cedar one and apart from it now being very grey, it looks like it will last another 40 years and its been kept outside the whole time.

EDIT - The 40 something year old cedar clothes line prop, still in operational service.
Image
Last edited by nowty on Thu Jul 08, 2021 4:19 pm, edited 1 time in total.
18.7kW PV > 109MWh generated
Ripple 6.6kW Wind + 4.5kW PV > 26MWh generated
5 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 510 m3
Mr Gus
Posts: 3813
Joined: Sun Jun 13, 2021 9:42 pm
Location: Tofu eaters paradise (harrumph)

Re: Raised beds

#7

Post by Mr Gus »

*Cough* Nice shrubbery
1906 ripplewatts @wind Turb-ine-erry
It's the wifes Tesla 3 (she lets me wash it)
Leaf 24
Celotex type insulation stuffed most places
Skip diver to the gentry
Austroflamm WBS
A finger of solar + shed full more
Post Reply