Idiot's guide to a self build battery

User avatar
Joeboy
Posts: 8096
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Idiot's guide to a self build battery

#141

Post by Joeboy »

Oldgreybeard wrote: Thu Sep 01, 2022 6:54 pm
Joeboy wrote: Thu Sep 01, 2022 6:25 pm I am looking forward to seeing your build, exciting when it all rolls in! When are you starting?
If stuff arrives when promised then I should get to start putting things together in about ten days time. Depends on whether the key bits arrive on time.
I've had a few things from Grant at Bimble and even up here in a remote postal zone it's never taken more than a week. An excellent guy and company.
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Oldgreybeard
Posts: 1873
Joined: Thu Sep 09, 2021 3:42 pm
Location: North East Dorset

Re: Idiot's guide to a self build battery

#142

Post by Oldgreybeard »

Joeboy wrote: Thu Sep 01, 2022 7:17 pm I've had a few things from Grant at Bimble and even up here in a remote postal zone it's never taken more than a week. An excellent guy and company.
The Bimble stuff arrived today, but I'm waiting on the rail and bracket parts, they had a ten to twelve day lead time unfortunately.
25 off 250W Perlight solar panels, installed 2014, with a 6kW PowerOne inverter, about 6,000kWh/year generated
6 off Pylontech US3000C batteries, with a Sofar ME3000SP inverter
User avatar
Joeboy
Posts: 8096
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Idiot's guide to a self build battery

#143

Post by Joeboy »

Oldgreybeard wrote: Thu Sep 01, 2022 7:31 pm
Joeboy wrote: Thu Sep 01, 2022 7:17 pm I've had a few things from Grant at Bimble and even up here in a remote postal zone it's never taken more than a week. An excellent guy and company.
The Bimble stuff arrived today, but I'm waiting on the rail and bracket parts, they had a ten to twelve day lead time unfortunately.
It's good you got rail, in the couple of weeks between my last order and looking again (solar sparky), the were sold out of rail and the tile hangers I had been using too, crazy busy times! Best of fortune to you in the build.
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Caesium
Posts: 218
Joined: Mon Sep 06, 2021 9:01 pm
Location: Brighton

Re: Idiot's guide to a self build battery

#144

Post by Caesium »

Joeboy wrote: Thu Sep 01, 2022 6:24 pm Pretty sure that Caesium's will be at his 🏠 first.
Yep I've been given a date of around 20th September to reach a UK port, then to my door by 1st October. Not sure what ship it's on, I'll probe for more information if I don't start to get UK tracking info by around the 25th. Just have to be patient with the slow boats I guess :)
Caesium
Posts: 218
Joined: Mon Sep 06, 2021 9:01 pm
Location: Brighton

Re: Idiot's guide to a self build battery

#145

Post by Caesium »

Joeboy wrote: Thu Sep 01, 2022 7:17 pm I've had a few things from Grant at Bimble and even up here in a remote postal zone it's never taken more than a week. An excellent guy and company.
I've recently realised I'm actually pretty local to Bimble, they're no more than a few miles away up the road. Nice to see they're well respected around here so I'll have to drop by some day when I have an excuse to buy more things :) Been eyeing up a 5kW Solis hybrid inverter to raise my charging/discharging capabilities..
Moxi
Posts: 2266
Joined: Sun Oct 31, 2021 3:46 pm

Re: Idiot's guide to a self build battery

#146

Post by Moxi »

Just as a foot note there was a short blip in traffic on the Suez Canal this week when VLCC lost steerage and ran aground in the approximately the same place as the Ever Given did in 202.

Happily this time it was re-floated and escorted by tugs in relatively short order but long its onward journey was a slower speed and therefore the ships behind it will invariably be a day or more late in their arrival at the destined ports.

Moxi
User avatar
Joeboy
Posts: 8096
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Idiot's guide to a self build battery

#147

Post by Joeboy »

That's the hardwood ply boards, sealed, glued and screwed down in place. Nice to have somewhere new to store the Frankenstein switch while I work out a location for it. :geek:

I'll start making up the gluelam plywood end blocks for the packs next week. Shortest DC cable runs will be achieved by moving the 2kW standy inverter up towards the roofline and leave space for Frankie and the bus bar boys on the lower section. Will of course then have to wire that section in. :D

Image

£1,687- 15 of LF280K (A) batteries incl del, bus bars n bolts
£60.72 - 1 of 15s 5A balance board.
£60 framework and bolts
£20 DC-DC variable 20A buckboard (battery charger)
£38 Amp clamp (AC AND DC capable)
£60 Frankenstein breaker & 2 125A fuses
£26 2 of 2mtr lengths 25mm2 DC cable
£12 Hammer crimper
£36 Solder kit gear, 18awg cable & heatshrink kit
£24 lugs for AWG2 & AWG18 wire, reel of solder.
£13 100A busbar to match spare.
£2,049 total
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
User avatar
Joeboy
Posts: 8096
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Idiot's guide to a self build battery

#148

Post by Joeboy »

That's the balance paid on the batteries. Rather excited! One step closer.... :lol:
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
User avatar
Joeboy
Posts: 8096
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Idiot's guide to a self build battery

#149

Post by Joeboy »

A couple of DC cables soldered today to get them off the Pylontechs and connected to the Frankenstein fused isolation switch. Enjoyed trying out my manual cable crimper, brilliant tool! :D

Next up when more crimps and second busbar arrive will be a carded busbar mounting point as a jump off for the 2kW back up inverter and to the LF280K battery stack.

Image

Image

Image
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
User avatar
Joeboy
Posts: 8096
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Idiot's guide to a self build battery

#150

Post by Joeboy »

Paid the balance yesterday morning. These photos in just now. :)
Tracking No coming before end of week, how good is that?

Image

Image

Image

Image
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Post Reply