Setting offset on solar supply

Post Reply
Thebeeman
Posts: 221
Joined: Tue Jun 14, 2022 8:56 am

Setting offset on solar supply

#1

Post by Thebeeman »

I have a LuxPower LXP 3600ACS installed that is showing 10W solar when none is being produced. I've seen on here mention of adjusting the offset but can't find it via search and the manual is less than helpful. Any ideas will be gratefully received, it's not effecting operation only my brain as it's not correct.
Top
User avatar
Stinsy
Posts: 2946
Joined: Wed Jun 02, 2021 1:09 pm

Re: Setting offset on solar supply

#2

Post by Stinsy »

You have to email Lux in China. Usually a software update solves this.
12x 340W JA Solar panels (4.08kWp)
3x 380W JA Solar panels (1.14kWp)
5x 2.4kWh Pylontech batteries (12kWh)
LuxPower inverter/charger

(Artist formally known as ******, well it should be obvious enough to those for whom such things are important.)
Top
Thebeeman
Posts: 221
Joined: Tue Jun 14, 2022 8:56 am

Re: Setting offset on solar supply

#3

Post by Thebeeman »

Thanks for the very prompt reply.
Top
User avatar
nowty
Posts: 5887
Joined: Mon May 31, 2021 2:36 pm
Location: South Coast

Re: Setting offset on solar supply

#4

Post by nowty »

When the "offset" has been mentioned, its regarding the grid import / export value.
18.7kW PV > 109MWh generated
Ripple 6.6kW Wind + 4.5kW PV > 27MWh generated
6 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 510 m3
Top
Thebeeman
Posts: 221
Joined: Tue Jun 14, 2022 8:56 am

Re: Setting offset on solar supply

#5

Post by Thebeeman »

Thanks again.
Top
Post Reply

Return to “Energy storage, batteries, energy tariffs”