February

User avatar
Joeboy
Posts: 8006
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: February

#11

Post by Joeboy »

openspaceman wrote: Sun Feb 05, 2023 3:27 pm It looks like my new panels will exceed 4.5kWh today, bettering the previous 4.09kWh 15days ago. The main array is at 6.2kWh with about 90 minutes of daylight to go.

This is when I regret only having 6.5kWh battery
7kWh PV in here today, mostly due to tree shading but thats ok. Nice to see these upward ticks, great to be on a rising trend again.
OSM, I feel for you, having limited battery storage is a pita and frustrating. Could do a lot worse than look into the LF280's as an expansion path?

Day 3 for no gch for Lower floor and HWT gas has been off for about 10 days I think.
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Bugtownboy
Posts: 958
Joined: Tue Jun 01, 2021 12:35 pm

Re: February

#12

Post by Bugtownboy »

Joeboy wrote: Sun Feb 05, 2023 1:25 pm
Bugtownboy wrote: Sun Feb 05, 2023 1:18 pm Nowty will have memories of these cliffs :shock:


Image

Just watched a Monarch butterfly float past the terrace. Lovely.
Excellent, happy hols pal!
Trying hard, Joe 8-)
openspaceman
Posts: 662
Joined: Mon Mar 21, 2022 7:37 pm

Re: February

#13

Post by openspaceman »

Joeboy wrote: Sun Feb 05, 2023 3:55 pm
OSM, I feel for you, having limited battery storage is a pita and frustrating. Could do a lot worse than look into the LF280's as an expansion path?
I don't want to get too cocky, having just got the second string and charger working, but yes I do like the idea of assembling a 16 cell LF280 battery with cell protection but it will have to be at the other side of the house where I have a bit of utility space.

The only reason the current battery and inverter are not there is that the supplier insisted they were close to the consumer unit and the current transformer cables could not be lengthened (or cut).

As I now have permission from DNO for 5.6kW generation capacity I just need to know what my options are, without upsetting my FIT
Morso S11
FIT
16 Sharp PV panels facing WSW 4kW
Solarmax 4200S inverter
Non FIT
3 Canadian solar DC coupled 1.75kW facing SSE
Storage
Growatt SPA3000TL BL inverter ac coupled
Growatt GBLI6532 6.5kWh lithium phosphate battery
User avatar
Joeboy
Posts: 8006
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: February

#14

Post by Joeboy »

openspaceman wrote: Sun Feb 05, 2023 4:50 pm
Joeboy wrote: Sun Feb 05, 2023 3:55 pm
OSM, I feel for you, having limited battery storage is a pita and frustrating. Could do a lot worse than look into the LF280's as an expansion path?
I don't want to get too cocky, having just got the second string and charger working, but yes I do like the idea of assembling a 16 cell LF280 battery with cell protection but it will have to be at the other side of the house where I have a bit of utility space.

The only reason the current battery and inverter are not there is that the supplier insisted they were close to the consumer unit and the current transformer cables could not be lengthened (or cut).

As I now have permission from DNO for 5.6kW generation capacity I just need to know what my options are, without upsetting my FIT
Sticking to the DC side you won't touch or affect the fit. Reading the above your worst thing is voltage drop over distance, that might cost a few quid extra in cable diameter. You'll want to know the make up of the current battery packs (what cells/how many, their operating voltages). It was only when I went up from 14kWh battery storage to 28kWh that the mental of 'oh no, how much gave we got left' loosened.
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Yuff
Posts: 457
Joined: Sat Dec 31, 2022 1:18 pm
Location: East Midlands

Re: February

#15

Post by Yuff »

Joeboy wrote: Sun Feb 05, 2023 3:55 pm
openspaceman wrote: Sun Feb 05, 2023 3:27 pm It looks like my new panels will exceed 4.5kWh today, bettering the previous 4.09kWh 15days ago. The main array is at 6.2kWh with about 90 minutes of daylight to go.

This is when I regret only having 6.5kWh battery
7kWh PV in here today, mostly due to tree shading but thats ok. Nice to see these upward ticks, great to be on a rising trend again.
OSM, I feel for you, having limited battery storage is a pita and frustrating. Could do a lot worse than look into the LF280's as an expansion path?

Day 3 for no gch for Lower floor and HWT gas has been off for about 10 days I think.
6.83 kWh here, best day of the year so far and a bit cloudy at peak generation, so hopefully tomorrow will be better
Mitsubishi Ecodan
ASHP 8.5kW x 2
12 x 460w Solar panels
9.5kWh GivEnergy
Batteries x 2
EVs x 4 210 kWh Batteries
Ripple 5.8 kW PV 0.547 kW Whitelaw Brae
User avatar
AlBargey
Posts: 187
Joined: Mon Oct 11, 2021 8:41 pm

Re: February

#16

Post by AlBargey »

A nice 11kWh today for us, and we don't start getting decent sun from the shading until well after 11am.


Image


I assume it's deliberate that embedded images now the same tiny unviewable size whatever setting chosen?

*Edit, hmm I tried the magic 800x600 and preview still showed the image as a thumbnail. :cry:
Last edited by AlBargey on Sun Feb 05, 2023 11:27 pm, edited 1 time in total.
38m Barge, Solar (10.6 kWp), 26 kWh of LFP, Victron Quattro 8 kVA, CerboGX, 3,500L STP, 57kVa Perkins
Our live data: https://vrm.victronenergy.com/installat ... e/c76c4bf6
User avatar
nowty
Posts: 5737
Joined: Mon May 31, 2021 2:36 pm
Location: South Coast

Re: February

#17

Post by nowty »

AlBargey wrote: Sun Feb 05, 2023 10:49 pm A nice 11kWh today for us, and we don't start getting decent sun from the shading until well after 11am.


Image

I assume it's deliberate that embedded images now the same tiny unviewable size whatever setting chosen?
I set mine to 800x600 (15 inch-monitor) and get this with your image.
Image

Or max with 1600x1200 (21 inch-monitor)
Image
16.9kW PV > 109MWh generated
Ripple 6.6kW Wind + 4.5kW PV > 25MWh generated
5 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 510 m3
User avatar
AlBargey
Posts: 187
Joined: Mon Oct 11, 2021 8:41 pm

Re: February

#18

Post by AlBargey »

nowty wrote: Sun Feb 05, 2023 11:10 pm
I set mine to 800x600 (15 inch-monitor) and get this with your image.
Postimg doesn't like me anymore then? mine was also set to 800x600 and I tried above..
38m Barge, Solar (10.6 kWp), 26 kWh of LFP, Victron Quattro 8 kVA, CerboGX, 3,500L STP, 57kVa Perkins
Our live data: https://vrm.victronenergy.com/installat ... e/c76c4bf6
NikoV6
Posts: 218
Joined: Thu Aug 11, 2022 6:42 am

Re: February

#19

Post by NikoV6 »

25kwh from yesterday, even sent 2.4 to the grid! :evil:

Car will not play nicely with the zappi in eco+ at the moment, not sure why!
14Kw Mitsubishi Ecodan ASHP
22 x JA Solar 455W Mono Perc Half Cell Silvers
Solis 8.0Kw 5G Dual MPPT Inverter
13.5Kw Tesla Powerwall
Zappi 2 Charger
iBoost
Bugtownboy
Posts: 958
Joined: Tue Jun 01, 2021 12:35 pm

Re: February

#20

Post by Bugtownboy »

Although the weather here has been generally brilliant, we did have an interesting Saturday.

Some images from YT

Post Reply