Flaming June

User avatar
Stinsy
Posts: 2850
Joined: Wed Jun 02, 2021 1:09 pm

Re: Flaming June

#51

Post by Stinsy »

6th and 7th have been poor days for me, otherwise absolutely stonking performance to-date!


Image
12x 340W JA Solar panels (4.08kWp)
3x 380W JA Solar panels (1.14kWp)
5x 2.4kWh Pylontech batteries (12kWh)
LuxPower inverter/charger

(Artist formally known as ******, well it should be obvious enough to those for whom such things are important.)
Moxi
Posts: 2265
Joined: Sun Oct 31, 2021 3:46 pm

Re: Flaming June

#52

Post by Moxi »

Same here, unbelievably good, Stack is back to full by 2pm most days and the rest spills to the grid to try and keep the scabby coal and Gas plants off - although from Dan and Nowtys thread that doesn't seem to be too successful but at least its contributing to a better fuel mix :)

Moxi
MrPablo
Posts: 277
Joined: Mon Oct 17, 2022 1:26 pm

Re: Flaming June

#53

Post by MrPablo »

On the subject of spilling back to the grid, how exactly does that work from a technical perspective?

I assume due to the voltage conversion at the local substation that little to no excess makes it onto the HV distribution network.
Does that mean that the increased voltage coming from my connection to the substation (due to exporting) is redistributed back out to other houses consuming from the substation? As a result, is export from my PV installation purely limited to my immediate substation consumers?

I'm sure I'm grossly oversimplifying but I'm sure there's some real experts on this forum who can provide real details.
10x 405W JA Solar panels (4.05kWp) @ 5 degrees
3x 405W Longi panels (1.22kWp) @ 90 degrees
16.5kWh DIY LifePo4 battery
Solis inverter/charger
0.6kW Ripple WT
64kWh Kia E-Niro
smegal
Posts: 290
Joined: Fri Apr 08, 2022 7:51 pm

Re: Flaming June

#54

Post by smegal »

MrPablo wrote: Mon Jun 12, 2023 12:20 pm On the subject of spilling back to the grid, how exactly does that work from a technical perspective?

I assume due to the voltage conversion at the local substation that little to no excess makes it onto the HV distribution network.
Does that mean that the increased voltage coming from my connection to the substation (due to exporting) is redistributed back out to other houses consuming from the substation? As a result, is export from my PV installation purely limited to my immediate substation consumers?

I'm sure I'm grossly oversimplifying but I'm sure there's some real experts on this forum who can provide real details.
I can't quite remember, but I'd assume backfeeding will increase the voltage slightly on the phase you're connected to, feeding other people on that phase downstream of the substation.
User avatar
Stinsy
Posts: 2850
Joined: Wed Jun 02, 2021 1:09 pm

Re: Flaming June

#55

Post by Stinsy »

MrPablo wrote: Mon Jun 12, 2023 12:20 pm On the subject of spilling back to the grid, how exactly does that work from a technical perspective?

I assume due to the voltage conversion at the local substation that little to no excess makes it onto the HV distribution network.
Does that mean that the increased voltage coming from my connection to the substation (due to exporting) is redistributed back out to other houses consuming from the substation? As a result, is export from my PV installation purely limited to my immediate substation consumers?

I'm sure I'm grossly oversimplifying but I'm sure there's some real experts on this forum who can provide real details.
Similarly to how water will flow from high pressure to lower pressure, current flows from high voltage to lower voltage.

Imagine you have a 12V lead-acid battery, if you want to charge it you apply a higher voltage (eg 13.8V or 14.4V), well the grid is similar except for the complication of alternating current. It is simple to apply power to the grid or take power from it.

Transformers work in both directions too, although it is more likely that the power you inject will be used by other consumers on your local 11kV transformer thus reducing the amount of power flowing from the grid to the transformer.
12x 340W JA Solar panels (4.08kWp)
3x 380W JA Solar panels (1.14kWp)
5x 2.4kWh Pylontech batteries (12kWh)
LuxPower inverter/charger

(Artist formally known as ******, well it should be obvious enough to those for whom such things are important.)
User avatar
Stinsy
Posts: 2850
Joined: Wed Jun 02, 2021 1:09 pm

Re: Flaming June

#56

Post by Stinsy »

I'm just about managing to use the power I'm generating. Car charging at 6A, tumbler running, AC on:


Image
12x 340W JA Solar panels (4.08kWp)
3x 380W JA Solar panels (1.14kWp)
5x 2.4kWh Pylontech batteries (12kWh)
LuxPower inverter/charger

(Artist formally known as ******, well it should be obvious enough to those for whom such things are important.)
User avatar
nowty
Posts: 5790
Joined: Mon May 31, 2021 2:36 pm
Location: South Coast

Re: Flaming June

#57

Post by nowty »

Its a hard job on a day like this. :D

Aircon on, 10A going into the EV and still exporting 3.3kW.

I could turn the charger up but it would fill up too fast. :lol:

Image
18.7kW PV > 109MWh generated
Ripple 6.6kW Wind + 4.5kW PV > 26MWh generated
5 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 510 m3
richbee
Posts: 601
Joined: Tue Apr 19, 2022 3:39 pm
Location: Northumberland

Re: Flaming June

#58

Post by richbee »

As I have no EV, no hot water cylinder / heat pump etc, I'm embracing the export - especially now that I'm on Octopus Outgoing - 15p/kWh instead of the previous 5p/kWh with SoEnergy :D :D :D
Solar PV since July '22:
5.6kWp east/west facing
3.6kW Sunsynk hybrid inverter
2x 5.12kWh Sunsynk batteries
1.6kWp Hoymiles East/West facing PV on the man cave
Ripple DW 2kW
Ripple WB 200W
User avatar
Joeboy
Posts: 8096
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Flaming June

#59

Post by Joeboy »

richbee wrote: Tue Jun 13, 2023 4:49 pm As I have no EV, no hot water cylinder / heat pump etc, I'm embracing the export - especially now that I'm on Octopus Outgoing - 15p/kWh instead of the previous 5p/kWh with SoEnergy :D :D :D
That's good money for home generation. I like the sound of that. Almost 30 degs here today. Couple of wee projects but kicking back at a slower pace.

Image
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Yuff
Posts: 478
Joined: Sat Dec 31, 2022 1:18 pm
Location: East Midlands

Re: Flaming June

#60

Post by Yuff »

Decent day here too


Image
Mitsubishi Ecodan
ASHP 8.5kW x 2
12 x 460w Solar panels
9.5kWh GivEnergy
Batteries x 2
EVs x 4 210 kWh Batteries
Ripple 5.8 kW PV 0.547 kW Whitelaw Brae
Post Reply