Any day now 🤞

[Lincs Robert]

Ok, so today’s the day that I’ve been advised by China that my recent order for 15 x 230Ah cells will arrive in the UK. My previous two orders “by land train” took 60 days, so I was surprised when the ETA on this shipment was about 30 days.

Bring it on

[Joeboy]

Ok, so today’s the day that I’ve been advised by China that my recent order for 15 x 230Ah cells will arrive in the UK. My previous two orders “by land train” took 60 days, so I was surprised when the ETA on this shipment was about 30 days.

Bring it on

Merry Christmas !!

[Lincs Robert]

Ok, so today’s the day that I’ve been advised by China that my recent order for 15 x 230Ah cells will arrive in the UK. My previous two orders “by land train” took 60 days, so I was surprised when the ETA on this shipment was about 30 days.

Bring it on

And as if by magic, late last night I had a message from DPD saying that they had my packages in the UK and would be in touch in due course regarding delivery. So, I’m hoping that I’ll be busy next week . Better finish getting my 3rd Lux unit installed hadn’t I?

[dan_b]

What's your plan for them?

[nowty]

Ok, so today’s the day that I’ve been advised by China that my recent order for 15 x 230Ah cells will arrive in the UK. My previous two orders “by land train” took 60 days, so I was surprised when the ETA on this shipment was about 30 days.

Bring it on

And as if by magic, late last night I had a message from DPD saying that they had my packages in the UK and would be in touch in due course regarding delivery. So, I’m hoping that I’ll be busy next week . Better finish getting my 3rd Lux unit installed hadn’t I?

Have you got an export tariff for the saving sessions ?

[Lincs Robert]

What's your plan for them?

At the moment I have two Lux ACS 3600 units with 5 Pylon US2000 on each and also a Chinese stack each. It’s been in a year and works well. The only minor issue is that I now have more storage than I can charge on my Octopus Go 4 hour window overnight. Two Lux units gives me a max charge rate of roughly 7kW, so that’s 28kWh that I can import overnight. Sometimes it’s actually less than that as the batteries charge rate reduces when it’s cold - it does warm during the charge cycle, but there is an occasional restriction. Each of my Chinese stacks adds another 13.4kWh gross, thus giving me a total gross capacity of 50.88kWh.

The plan is to add a third Lux unit, this will increase the charge rate to a theoretical 10.8kW, so in ideal conditions I can import 43kWh in the 4 hour window. However, the third Lux unit needs its own batteries and part of this will be met with the new Chinese stack, supplementing 4 of my existing 10 Pylons. Each of the existing Lux units will have its Pylon count reduced from 5 to 3, with the freed up 4 going to the new Lux. The capacity of the new Chinese stack is slightly less than the existing one as it will be 230Ah cells rather than the existing 280s. This means its capacity is slightly less @ 11KWh rather than the existing 13.4kWh, hence giving it the extra Pylon which neatly levels it all up. The new total gross will be just shy of 62kWh.

Hopefully that all makes sense. I know I’m on the threshold with the 3 Pylons to achieve a 3.6kW charge rate - but I’ll hopefully add some more when funds permit and I’ve seen how the system performs in practice over the coming months.

A somewhat lengthy explanation- but it is the trail of how I got to where I am now.

Cheers- Rob

[Joeboy]

What's your plan for them?

At the moment I have two Lux ACS 3600 units with 5 Pylon US2000 on each and also a Chinese stack each. It’s been in a year and works well. The only minor issue is that I now have more storage than I can charge on my Octopus Go 4 hour window overnight. Two Lux units gives me a max charge rate of roughly 7kW, so that’s 28kWh that I can import overnight. Sometimes it’s actually less than that as the batteries charge rate reduces when it’s cold - it does warm during the charge cycle, but there is an occasional restriction. Each of my Chinese stacks adds another 13.4kWh gross, thus giving me a total gross capacity of 50.88kWh.

The plan is to add a third Lux unit, this will increase the charge rate to a theoretical 10.8kW, so in ideal conditions I can import 43kWh in the 4 hour window. However, the third Lux unit needs its own batteries and part of this will be met with the new Chinese stack, supplementing 4 of my existing 10 Pylons. Each of the existing Lux units will have its Pylon count reduced from 5 to 3, with the freed up 4 going to the new Lux. The capacity of the new Chinese stack is slightly less than the existing one as it will be 230Ah cells rather than the existing 280s. This means its capacity is slightly less @ 11KWh rather than the existing 13.4kWh, hence giving it the extra Pylon which neatly levels it all up. The new total gross will be just shy of 62kWh.

Hopefully that all makes sense. I know I’m on the threshold with the 3 Pylons to achieve a 3.6kW charge rate - but I’ll hopefully add some more when funds permit and I’ve seen how the system performs in practice over the coming months.

A somewhat lengthy explanation- but it is the trail of how I got to where I am now.

Cheers- Rob

Some seriously impressive storage there! Are the battery prices much the same as last year?

[Lincs Robert]

What's your plan for them?

At the moment I have two Lux ACS 3600 units with 5 Pylon US2000 on each and also a Chinese stack each. It’s been in a year and works well. The only minor issue is that I now have more storage than I can charge on my Octopus Go 4 hour window overnight. Two Lux units gives me a max charge rate of roughly 7kW, so that’s 28kWh that I can import overnight. Sometimes it’s actually less than that as the batteries charge rate reduces when it’s cold - it does warm during the charge cycle, but there is an occasional restriction. Each of my Chinese stacks adds another 13.4kWh gross, thus giving me a total gross capacity of 50.88kWh.

The plan is to add a third Lux unit, this will increase the charge rate to a theoretical 10.8kW, so in ideal conditions I can import 43kWh in the 4 hour window. However, the third Lux unit needs its own batteries and part of this will be met with the new Chinese stack, supplementing 4 of my existing 10 Pylons. Each of the existing Lux units will have its Pylon count reduced from 5 to 3, with the freed up 4 going to the new Lux. The capacity of the new Chinese stack is slightly less than the existing one as it will be 230Ah cells rather than the existing 280s. This means its capacity is slightly less @ 11KWh rather than the existing 13.4kWh, hence giving it the extra Pylon which neatly levels it all up. The new total gross will be just shy of 62kWh.

Hopefully that all makes sense. I know I’m on the threshold with the 3 Pylons to achieve a 3.6kW charge rate - but I’ll hopefully add some more when funds permit and I’ve seen how the system performs in practice over the coming months.

A somewhat lengthy explanation- but it is the trail of how I got to where I am now.

Cheers- Rob

Some seriously impressive storage there! Are the battery prices much the same as last year?

No, much lower. My current shipment cells were about $64 for each 230, the previous 280s were about $107 each. I also enjoyed a more favourable exchange rate in paying for them.

[Joeboy]

At the moment I have two Lux ACS 3600 units with 5 Pylon US2000 on each and also a Chinese stack each. It’s been in a year and works well. The only minor issue is that I now have more storage than I can charge on my Octopus Go 4 hour window overnight. Two Lux units gives me a max charge rate of roughly 7kW, so that’s 28kWh that I can import overnight. Sometimes it’s actually less than that as the batteries charge rate reduces when it’s cold - it does warm during the charge cycle, but there is an occasional restriction. Each of my Chinese stacks adds another 13.4kWh gross, thus giving me a total gross capacity of 50.88kWh.

The plan is to add a third Lux unit, this will increase the charge rate to a theoretical 10.8kW, so in ideal conditions I can import 43kWh in the 4 hour window. However, the third Lux unit needs its own batteries and part of this will be met with the new Chinese stack, supplementing 4 of my existing 10 Pylons. Each of the existing Lux units will have its Pylon count reduced from 5 to 3, with the freed up 4 going to the new Lux. The capacity of the new Chinese stack is slightly less than the existing one as it will be 230Ah cells rather than the existing 280s. This means its capacity is slightly less @ 11KWh rather than the existing 13.4kWh, hence giving it the extra Pylon which neatly levels it all up. The new total gross will be just shy of 62kWh.

Hopefully that all makes sense. I know I’m on the threshold with the 3 Pylons to achieve a 3.6kW charge rate - but I’ll hopefully add some more when funds permit and I’ve seen how the system performs in practice over the coming months.

A somewhat lengthy explanation- but it is the trail of how I got to where I am now.

Cheers- Rob

Some seriously impressive storage there! Are the battery prices much the same as last year?

No, much lower. My current shipment cells were about $64 for each 230, the previous 280s were about $107 each. I also enjoyed a more favourable exchange rate in paying for them.

That's great news! All the best with the build.

[dan_b]

Crikey that's a lot of battery storage!
Size envy incoming...