DNO Approval

Post Reply
AGT
Posts: 1004
Joined: Sat Jan 29, 2022 11:26 am

DNO Approval

#1

Post by AGT »

Are the diy installers bothering to advise the DNO?

Would they ever find out?

I’m an ex qualified spark/ certs still up to date but no MCS accreditation, just wondering what everyone else is doing
Kommando
Posts: 83
Joined: Sat Aug 12, 2023 10:38 am

Re: DNO Approval

#2

Post by Kommando »

Well the linesman have visited me twice over the last few years for line repairs and a new transformer. Once was before my DNO G98 notification and second after, both times the panels and inverter were not part of the conversation and seemed not to be of interest. On the first visit if it had been mentioned I would have said it was only commissioned a few days ago and rapidly made the notification as you have 30 days after commissioning. Google Maps satellite image updates every 4 or 5 years which is the other way they could know but who is to say it was not off grid.
AGT
Posts: 1004
Joined: Sat Jan 29, 2022 11:26 am

Re: DNO Approval

#3

Post by AGT »

Yes, and now the installs that are battery based with hybrid inverter with no panels.

I’ve had my FIT meter ‘inspected’ but nothing else.
Andy
Posts: 521
Joined: Sun Aug 29, 2021 12:16 pm

Re: DNO Approval

#4

Post by Andy »

AGT wrote: Sat Dec 30, 2023 1:05 pm Are the diy installers bothering to advise the DNO?

Would they ever find out?

I’m an ex qualified spark/ certs still up to date but no MCS accreditation, just wondering what everyone else is doing
Installations don’t need to be mcs. I ended up notifying my heatpump and car charger as they had no records. I reckon they probably prefer to know for network planning purposes.
AGT
Posts: 1004
Joined: Sat Jan 29, 2022 11:26 am

Re: DNO Approval

#5

Post by AGT »

I did my own EV charger, I did the C&G EV installation course, just didn’t bother with the DNO, as far as I’m concerned it’s a load no different than a 10kW electric shower and if the installation can take the lid crack on..
User avatar
Stinsy
Posts: 2946
Joined: Wed Jun 02, 2021 1:09 pm

Re: DNO Approval

#6

Post by Stinsy »

AGT wrote: Sat Dec 30, 2023 2:48 pm I did my own EV charger, I did the C&G EV installation course, just didn’t bother with the DNO, as far as I’m concerned it’s a load no different than a 10kW electric shower and if the installation can take the lid crack on..
An electric shower might be used for 10mins 2-3 times a day. EV charging point will pull 7.4kW hour-after-hour. That's the difference.

If a few houses on the same phase turn their electric showers on at the same time the local transformer might start to warm up, but it'll soo cool down when they turn off again. Whereas if a few houses on the same phase turn their EV charging points on at the same time, the transformer just keeps getting hotter and hotter until it cooks itself.
12x 340W JA Solar panels (4.08kWp)
3x 380W JA Solar panels (1.14kWp)
5x 2.4kWh Pylontech batteries (12kWh)
LuxPower inverter/charger

(Artist formally known as ******, well it should be obvious enough to those for whom such things are important.)
Mart
Posts: 1329
Joined: Mon Jun 14, 2021 1:17 pm

Re: DNO Approval

#7

Post by Mart »

Stinsy wrote: Sat Dec 30, 2023 3:11 pm
AGT wrote: Sat Dec 30, 2023 2:48 pm I did my own EV charger, I did the C&G EV installation course, just didn’t bother with the DNO, as far as I’m concerned it’s a load no different than a 10kW electric shower and if the installation can take the lid crack on..
An electric shower might be used for 10mins 2-3 times a day. EV charging point will pull 7.4kW hour-after-hour. That's the difference.

If a few houses on the same phase turn their electric showers on at the same time the local transformer might start to warm up, but it'll soo cool down when they turn off again. Whereas if a few houses on the same phase turn their EV charging points on at the same time, the transformer just keeps getting hotter and hotter until it cooks itself.
Is that partly why the law was changed/made so that all home chargers now have to be 'smart'?

Ours finally works fine, but for over a year we've had loads of problems with it dropping out. Turns out our wifi just wasn't strong enough, and no connection, meant no use. In the end we used TP Links to connect it 'directly' to the router.
8.7kWp PV [2.12kWp SSW + 4.61kWp ESE PV + 2.0kWp WNW PV]
Two BEV's.
Two small A2A heatpumps.
20kWh Battery storage.
AGT
Posts: 1004
Joined: Sat Jan 29, 2022 11:26 am

Re: DNO Approval

#8

Post by AGT »

My storage heaters are on for longer than the EV!
But I get what you are saying!
spread-tee
Posts: 634
Joined: Mon May 31, 2021 7:16 pm
Location: ville of spiky things

Re: DNO Approval

#9

Post by spread-tee »

I notified Shedhenge when it went live in Feb/March via g98 to UKPN as a diy system no problem . Also we have applied on behalf of a customer for a 5kW ish system, no news yet but so far they seem happy with the info we have supplied, we are not MCS but a registered sparks will do all the AC connections and self certify. For DIYers, as PV is notifiable, compliance with building regs could be more problematic than the DNO maybe?.

Desp
Blah blah blah
User avatar
nowty
Posts: 5886
Joined: Mon May 31, 2021 2:36 pm
Location: South Coast

Re: DNO Approval

#10

Post by nowty »

Many DIY'ers on here have self notified the DNO, its very straight forward for a simple G98 or a G99 fast track notification. And you definitely need to do it if you want to be paid for export.
18.7kW PV > 109MWh generated
Ripple 6.6kW Wind + 4.5kW PV > 27MWh generated
6 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 510 m3
Post Reply