Ripple CFD vote.....

Wind turbines
Tinbum
Posts: 1115
Joined: Mon May 31, 2021 9:55 pm

Re: Ripple CFD vote.....

#21

Post by Tinbum »

Yuff wrote: Wed Apr 10, 2024 11:52 am I’ve had an email today about voting…..
:xl:
85no 58mm solar thermal tubes, 28.5Kw PV, 3x Sunny Island 5048, 2795 Ah (135kWh) (c20) Rolls batteries 48v, 8kWh Growatt storage, 22 x US3000C Pylontech, Sofar ME3000's, Brosley wood burner and 250lt DHW
AE-NMidlands
Posts: 2024
Joined: Wed Jun 02, 2021 6:10 pm

Re: Ripple CFD vote.....

#22

Post by AE-NMidlands »

There are obviously plusses and minuses of both options...

What do people who are in both think about going (voting) to use the two options, one on each? I have twice as much in KirkHill as in Derril Water, but wouldn't really mind which one had the CFD if we did try to coordinate our votes.
A
2.0 kW/4.62 MWh pa in Ripples, 4.5 kWp W-facing pv, 9.5 kWh batt
30 solar thermal tubes, 2MWh pa in Stockport, plus Congleton and Kinlochbervie Hydros,
Most travel by bike, walking or bus/train. Veg, fruit - and Bees!
openspaceman
Posts: 662
Joined: Mon Mar 21, 2022 7:37 pm

Re: Ripple CFD vote.....

#23

Post by openspaceman »

John_S wrote: Wed Apr 10, 2024 9:52 am I also think that if they change to CFDs making projects an investment rather than an energy price hedge, there is little reason to keep the 120% cap.
I don't understand much of this; I was too late for the first two wind farms, not interested in a solar farm and registered for the next wind project but only for the principal of generating some of my power remotely via a Co-Op.

I am otherwise not interested in just an investment, I prefer to spend it on the family and keep the IHT at bay.
Morso S11
FIT
16 Sharp PV panels facing WSW 4kW
Solarmax 4200S inverter
Non FIT
3 Canadian solar DC coupled 1.75kW facing SSE
Storage
Growatt SPA3000TL BL inverter ac coupled
Growatt GBLI6532 6.5kWh lithium phosphate battery
SporranMcDonald
Posts: 52
Joined: Thu Feb 16, 2023 10:29 am
Location: East Hampshire

Re: Ripple CFD vote.....

#24

Post by SporranMcDonald »

Thanks to Nowty for the additional information & insight.

Finally, I will vote for a CFD @ Kirk Hill. KH represents one-third of my ( meagre ) Ripple capacity.

This will balance the risk/reward considerations - as Graig Fatha ( forever non-CFD ) is the other two-thirds.

Roll-up, roll-up : place your bets . . . . .
But the renewable capacity is built, running ( nearly for KH ) and 100% in the bag !! :xl:
4 kWp Solar PV : 50%/50% SE/SW : Solis Hybrid 3.6 : Pylontec 9.6 kWh
5 kW & 4kW Air-to-Air Mitsubishi Heat Pumps
Ripple : Graig Fatha & Kirk Hill . . . . plus various other renewable projects.
No Car : bicycles : bus & train
Yuff
Posts: 477
Joined: Sat Dec 31, 2022 1:18 pm
Location: East Midlands

Re: Ripple CFD vote.....

#25

Post by Yuff »

I’ll second nowty for all the helpful info :praise:
Mitsubishi Ecodan
ASHP 8.5kW x 2
12 x 460w Solar panels
9.5kWh GivEnergy
Batteries x 2
EVs x 4 210 kWh Batteries
Ripple 5.8 kW PV 0.547 kW Whitelaw Brae
AE-NMidlands
Posts: 2024
Joined: Wed Jun 02, 2021 6:10 pm

Re: Ripple CFD vote.....

#26

Post by AE-NMidlands »

SporranMcDonald wrote: Wed Apr 10, 2024 1:52 pm Finally, I will vote for a CFD @ Kirk Hill. KH represents one-third of my ( meagre ) Ripple capacity.
This will balance the risk/reward considerations - as Graig Fatha ( forever non-CFD ) is the other two-thirds.
Roll-up, roll-up : place your bets . . . . .
But the renewable capacity is built, running ( nearly for KH ) and 100% in the bag !! :xl:
Thanks for making a choice, unless there are more of our people doing the opposite I will go the same way so as not to vote against you. So for me (at this stage):
CFD for KH, Stay as we are for DW then.

(But there's over a week to go yet, so we'll see if we get a majority either on way here.)
A
2.0 kW/4.62 MWh pa in Ripples, 4.5 kWp W-facing pv, 9.5 kWh batt
30 solar thermal tubes, 2MWh pa in Stockport, plus Congleton and Kinlochbervie Hydros,
Most travel by bike, walking or bus/train. Veg, fruit - and Bees!
Post Reply