Kris Harbour tuning a pelton turbine system to 2.5kW

Water turbines and anything associated
Post Reply
Stan
Posts: 373
Joined: Fri Jun 11, 2021 10:45 am

Kris Harbour tuning a pelton turbine system to 2.5kW

#1

Post by Stan »

Top
User avatar
Joeboy
Posts: 8019
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Kris Harbour tuning a pelton turbine system to 2.5kW

#2

Post by Joeboy »

:praise: 👏 👏
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Top
dan_b
Posts: 2246
Joined: Tue Jun 15, 2021 10:16 am
Location: SW London

Re: Kris Harbour tuning a pelton turbine system to 2.5kW

#3

Post by dan_b »

That was a great watch!
Tesla Model 3 Performance
Oversees an 11kWp solar array at work
Top
Adokforme
Posts: 614
Joined: Sun Sep 19, 2021 10:09 pm

Re: Kris Harbour tuning a pelton turbine system to 2.5kW

#4

Post by Adokforme »

Yes indeed, thanks for posting. learning something every day on here. :xx:
Top
resybaby
Posts: 293
Joined: Thu Aug 17, 2023 3:33 pm
Location: Cornwalls North Coast

Re: Kris Harbour tuning a pelton turbine system to 2.5kW

#5

Post by resybaby »

Love the simplicity of the rotating inlet filter :xl:
4.0kw FIT PV solar Sunnyboy 4000tl & 7 x 570w JA solar panels
7.08kw JA Solar panels & Sunsynk ECCO 3.6kw.
7 x US5000 Pylontechs.
4500l RWH
Full Biomass heating system
iBoost HW divertor
Full house internal walls insulation
600min Loft insulation
Top
dan_b
Posts: 2246
Joined: Tue Jun 15, 2021 10:16 am
Location: SW London

Re: Kris Harbour tuning a pelton turbine system to 2.5kW

#6

Post by dan_b »

Was anyone else triggered by all the water leaking out of the turbine enclosure though?!
Tesla Model 3 Performance
Oversees an 11kWp solar array at work
Top
Oliver90owner
Posts: 394
Joined: Wed Jun 16, 2021 3:48 pm

Re: Kris Harbour tuning a pelton turbine system to 2.5kW

#7

Post by Oliver90owner »

dan_b wrote: ↑Wed Aug 28, 2024 11:20 am Was anyone else triggered by all the water leaking out of the turbine enclosure though?!
Not sure if the side cover had been fitted for that bit of video. He was resetting the nozzles to maximise the kinetic energy collected by the spoons.

I found the video interesting - not so much ‘tuning’, more like just setting it up properly instead of the original installation using bits and pieces to hand at the time!
Top
Post Reply

Return to “Hydro Power”