ASHP & triple glazing

Air source, ground source and associated systems for heating homes
NoraBatty
Posts: 138
Joined: Sat Mar 23, 2024 10:40 am

Re: ASHP & triple glazing

#411

Post by NoraBatty »

You would not know it is cold here Joeboy.
House is toasty and warm with the ASHP doing its thing.
Cop is apparently down to 2.1, but that is yet again with a sub standard install yet to be fully tweaked.

And the temperature outside is cold!
Image
2.7kw Canadian solar. roof. 3kw solis G98 mcs
12kw midea ASHP
200l hot water
3152W RE, Whitelaw Brae
Octopus agile/outgoing fixed 15p

Planned;
Hybrid system
43kwh eve batteries, 3x16 280A
6-8+kw solar, DC connected.
User avatar
Joeboy
Posts: 8109
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: ASHP & triple glazing

#412

Post by Joeboy »

NoraBatty wrote: Sat Nov 23, 2024 12:01 am You would not know it is cold here Joeboy.
House is toasty and warm with the ASHP doing its thing.
Cop is apparently down to 2.1, but that is yet again with a sub standard install yet to be fully tweaked.

And the temperature outside is cold!
Image
That is great to see. A fair chance we'll be living that next weekend! Do you have a supplier in the NE for the insulated PB?

Been creeping about with my IR thermometer this morning and I knew we had a low performing bedroom with a gable end wall. 2 to 2.5 degs difference between that wall and adjacent walls. That's me up to 10 sheets of K118 kooltherm. Or 26 sqmtr of upgraded wall. Not doing this work until after Xmas but it will again give us a small step up in the home envelope. Funny thing is, I knew the trailing rooms. Just hadn't acted on it. :facepalm:
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Moxi
Posts: 2267
Joined: Sun Oct 31, 2021 3:46 pm

Re: ASHP & triple glazing

#413

Post by Moxi »

Anything is better than nothing as the saying goes so within the constraints of space cash and DIY I would say that will be a good improvement.

Moxi
AGT
Posts: 990
Joined: Sat Jan 29, 2022 11:26 am

Re: ASHP & triple glazing

#414

Post by AGT »

Joeboy wrote: Sat Nov 23, 2024 5:21 am
NoraBatty wrote: Sat Nov 23, 2024 12:01 am You would not know it is cold here Joeboy.
House is toasty and warm with the ASHP doing its thing.
Cop is apparently down to 2.1, but that is yet again with a sub standard install yet to be fully tweaked.

And the temperature outside is cold!
Image
That is great to see. A fair chance we'll be living that next weekend! Do you have a supplier in the NE for the insulated PB?

Been creeping about with my IR thermometer this morning and I knew we had a low performing bedroom with a gable end wall. 2 to 2.5 degs difference between that wall and adjacent walls. That's me up to 10 sheets of K118 kooltherm. Or 26 sqmtr of upgraded wall. Not doing this work until after Xmas but it will again give us a small step up in the home envelope. Funny thing is, I knew the trailing rooms. Just hadn't acted on it. :facepalm:
https://camelot-forum.co.uk/phpBB3/post ... 17&p=52528


remember the. Spray foam glue
User avatar
Fintray
Posts: 1558
Joined: Mon May 31, 2021 6:37 pm
Location: Aberdeenshire

Re: ASHP & triple glazing

#415

Post by Fintray »

Joeboy wrote: Sat Nov 23, 2024 5:21 am Do you have a supplier in the NE for the insulated PB?

Been creeping about with my IR thermometer this morning and I knew we had a low performing bedroom with a gable end wall. 2 to 2.5 degs difference between that wall and adjacent walls. That's me up to 10 sheets of K118 kooltherm. Or 26 sqmtr of upgraded wall. Not doing this work until after Xmas but it will again give us a small step up in the home envelope. Funny thing is, I knew the trailing rooms. Just hadn't acted on it. :facepalm:
You could try Sheffield Insulation.
3.87kWp PV
10.24kWp PV SolarEdge system
Tesla Powerwall 2
100 x 47mm Navitron tubes (still being installed!) Now likely to be removed for more PV.
MK2 PV router DHW diverter
Morso 5kW WBS
Vaillant AroTherm 10kW ASHP
Nissan Leaf
NoraBatty
Posts: 138
Joined: Sat Mar 23, 2024 10:40 am

Re: ASHP & triple glazing

#416

Post by NoraBatty »

Joeboy wrote: Sat Nov 23, 2024 5:21 am Do you have a supplier in the NE for the insulated PB?
I dont Joe, sorry that was for our old house down south.
It is sometimes cheaper to buy the board and the plasterboard seperately though as long as its foil faced it will do the same job.
We have a similar kind of gable wall with stairs running up here. Its also been internally insulated and maybe in the same stuff. The wall is still cooler than the other walls, but compared the the uninsulated but under the stairs is about 3 degree warmer. We may add an extra layer under this at some point, the seams of the boards are showing as a darker colour in the plaster and the screw holes have handily all popped the plaster off so fairly easy job, just a pain to do.

In the midst of the remedial work on the ashp and everything else now. I had hoped to get a thread up about it, but we now need remedial work on the remedial work. 😡.
Once theyve gone, il sit down and write the horror story.

Watching this thread with interest though. Glad the cold snap is over for you whilst you are in between heating systems and best of luck with the install.
2.7kw Canadian solar. roof. 3kw solis G98 mcs
12kw midea ASHP
200l hot water
3152W RE, Whitelaw Brae
Octopus agile/outgoing fixed 15p

Planned;
Hybrid system
43kwh eve batteries, 3x16 280A
6-8+kw solar, DC connected.
User avatar
Joeboy
Posts: 8109
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: ASHP & triple glazing

#417

Post by Joeboy »

Fintray wrote: Sat Nov 23, 2024 10:32 am
Joeboy wrote: Sat Nov 23, 2024 5:21 am Do you have a supplier in the NE for the insulated PB?

Been creeping about with my IR thermometer this morning and I knew we had a low performing bedroom with a gable end wall. 2 to 2.5 degs difference between that wall and adjacent walls. That's me up to 10 sheets of K118 kooltherm. Or 26 sqmtr of upgraded wall. Not doing this work until after Xmas but it will again give us a small step up in the home envelope. Funny thing is, I knew the trailing rooms. Just hadn't acted on it. :facepalm:
You could try Sheffield Insulation.
I forgot about them, Bridge of Don? Thanks, I'll go in past next week or so. Did find this online but it looks a bit gimmicky in advert.
Image
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
User avatar
Joeboy
Posts: 8109
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: ASHP & triple glazing

#418

Post by Joeboy »

We dared Storm Bert yesterday and had a run down to Crieff to collect Iggy. Queensferry crossing closed, heard that on radio and 2 lorries blocking the road South just North of Perth bridge. We got off before the bridge and went B roading to Perth looking for a charge point. :shock:

Got an Ionity & a coffee.

Image

Image

Image

Brilliant wee car on collection, Perthshire had quite a lot of snow so Iggy had a test straightaway and passed 👌. Went out for a run this morning for No1 to familiarise himself and sure enough, Red Iggy coming the other way within 1 mile! Our orange Iggy is a 2017 with 17,500 miles on it. Absolutely mint. Yes it has genuinely done 2,000 miles pa. :D

ASHP works to continue tomorrow and once complete I'll nip down to Southampton to collect the Autosleeper. :lol:

Yesterday the sat nav on the I5 slung us onto a Pertshire B road on our way down which became 14 miles of increasingly worsening road conditions. In the end we were at a decent elevation and there was no tarmac to see or farmhouses. The I5 was offering to go tail happy if I went anywhere near the throttle. It did it though, snow mode engaged and driving with an eggshell between boot sole & pedal. I won't go out like that again. Gungho daftie in me has to be put to sleep, he's more a liability than benefit these quieter days...

SWMBO was freaking out from the backseat, I used it all as a teaching moment between me n No1 son in what we do as men when it gets a bit hairy. 8-) No point bricking it, he was excellent, top co-pilot, upbeat and game on moment by moment. Very proud of him.

No1's still not happy though that his EV is trashed.
Image

Suzuki are bringing out their first full EV this year. If it's anything like Iggy it'll be worth a look.
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
User avatar
Joeboy
Posts: 8109
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: ASHP & triple glazing

#419

Post by Joeboy »

Just chucking this out to the borg mind. I thought nearly 800 quid was a bit steep for 10 sheets of insulation backed commercial pb? Had a look this evening and going the extra bit of work sticking together & collecting & accepting a lower insulation value, I found this price. Both shown for comparison.

Until this evening I was unaware of the price or performance gap.


Image

Image

With a 10% discount it's this price. Does that seem reasonable?

Image
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Richard77
Posts: 75
Joined: Thu Sep 19, 2024 3:26 pm

Re: ASHP & triple glazing

#420

Post by Richard77 »

How much difference in performance though?

I was looking at some of the kooltherm k118 37.5mm dot n dabbed for the garage that's been k-rend silicone rendered on the outside.

Couldn't believe the price of the k118 :shock:

So was looking at similar thickness PIR and normal plasterboard, but didn't want to compromise too much on performance as will have no heating in the garage for now.

Couldn't be bothered with the added expense of studding out the walls, etc.
Post Reply