
Ripple energy "strike off"
Re: Ripple energy "strike off"
Think 1st Energy have pulled the plug on data from wind farms. 

85no 58mm solar thermal tubes, 28.5Kw PV, 3x Sunny Island 5048, 135kWh Rolls batteries, 52kWh Growatt storage GBLI 6532, 66kWh Pylontech US3000C, 43kWh DIY, Sofar ME3000's, Brosley wood burner and 250lt DHW
Re: Ripple energy "strike off"
I see that as a positive step to cut the ties with 1st Energy.
GF and KH are collaborating with their volunteers to have their own dashboards direct out of the Coop's websites.
A sneak preview was sent to the GF members,

19.6kW PV > 114MWh generated
Ripple 6.6kW Wind + 4.5kW PV > 34MWh generated
7 Other RE Coop's
105kWh EV storage
90kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 530 m3
Ripple 6.6kW Wind + 4.5kW PV > 34MWh generated
7 Other RE Coop's
105kWh EV storage
90kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 530 m3
Re: Ripple energy "strike off"
So do I.
Right from the very first communication from them on social media, when they first bought the assets, I thought what a shower.
85no 58mm solar thermal tubes, 28.5Kw PV, 3x Sunny Island 5048, 135kWh Rolls batteries, 52kWh Growatt storage GBLI 6532, 66kWh Pylontech US3000C, 43kWh DIY, Sofar ME3000's, Brosley wood burner and 250lt DHW
-
- Posts: 81
- Joined: Thu Feb 16, 2023 10:29 am
- Location: East Hampshire
Re: Ripple energy "strike off"
I have occasionally been logging into the Ripple dashboard to check whether 1st Energy have complied with my request to Delete-my-Data.
I sent that deletion request about two weeks ago.
Yesterday the Ripple dashboard still showed my personal info, but turbine-output-info appears to have stopped updating after 4th May.
The real-time output on the "Insights" page shows No data for GF or KH.
Upon reflection the amount of information on the Ripple Dashboard was completely over-the-top / superfluous for my purpose.
What the Coop volunteers have come up with is entirely satisfactory IMO.
I sent that deletion request about two weeks ago.
Yesterday the Ripple dashboard still showed my personal info, but turbine-output-info appears to have stopped updating after 4th May.
The real-time output on the "Insights" page shows No data for GF or KH.
Upon reflection the amount of information on the Ripple Dashboard was completely over-the-top / superfluous for my purpose.
What the Coop volunteers have come up with is entirely satisfactory IMO.
4 kWp Solar PV : 50%/50% SE/SW : Solis Hybrid 3.6 : Pylontec 9.6 kWh
5 kW & 4kW Air-to-Air Mitsubishi Heat Pumps
GF + KH Coops : OctopusCollective : Triodos : Energy4All
No Car : bicycles : bus & train
5 kW & 4kW Air-to-Air Mitsubishi Heat Pumps
GF + KH Coops : OctopusCollective : Triodos : Energy4All
No Car : bicycles : bus & train