MCS and New solar charge controller

User avatar
nowty
Posts: 5721
Joined: Mon May 31, 2021 2:36 pm
Location: South Coast

Re: MCS and New solar charge controller

#11

Post by nowty »

Tay wrote: Sun Jun 23, 2024 2:58 pm I'll be interested to see if the bigger one gets warmer with the; as yet to be ordered; 575w panels, there will be a lot of juice going through them.
620W panels are now available in the same physical size.
16.9kW PV > 109MWh generated
Ripple 6.6kW Wind + 4.5kW PV > 25MWh generated
5 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 510 m3
AGT
Posts: 947
Joined: Sat Jan 29, 2022 11:26 am

Re: MCS and New solar charge controller

#12

Post by AGT »

Wow, they must be getting large now that it’s become a manual handling issue, I thought the 250’s were bad!
Tay
Posts: 290
Joined: Tue May 30, 2023 1:31 am

Re: MCS and New solar charge controller

#13

Post by Tay »

nowty wrote: Sun Jun 23, 2024 3:50 pm
Tay wrote: Sun Jun 23, 2024 2:58 pm I'll be interested to see if the bigger one gets warmer with the; as yet to be ordered; 575w panels, there will be a lot of juice going through them.
620W panels are now available in the same physical size.
Just saw that bimble has the 575's at £150 inc vat.. maybe by the time I get back thy might be less, I'm really happy with those canadian Solars.

Certainly looks like the Charge controller will still be good for the 620's - also more black on them as opposed tot he 575's with lots of silver.
PV 1.1kWh
Victron Multiplus 8K II 48v/100A + Victron 150/35 & 250/60 charge controller + lynx 1000
CerboGX, 25kW Pylontech batteries
Octopus Agile - Cheaper Battery Charging
Another 2.3kWh on the horizon - ground mount + 4x575's
User avatar
Joeboy
Posts: 7993
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: MCS and New solar charge controller

#14

Post by Joeboy »

We bought the 535's longi at £88 each incl vat from city plumbing. They are monsters! Took two of us to get them up and even then had to change panel install technique and use top wooden rail as a pivot point with stepladder set back so the pivot action didn't knock me off the steps. Lifted panels straight up vertical with a small lean in. Much beyond that size and I'd need a scaffold. Can't run up a roof with one of these on shoulder. :D

Black on black is defo the better look. Although I do have a soft spot for my old skool Sharp units on the workshop.


Image
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Post Reply