
Moxi
I'm sorry I'm out...Saladin wrote: ↑Mon Jul 07, 2025 2:04 pm I think we have vastly removed perspectives so our ascertations will differ. Let's not be binary about it.
For instance the DNO might be concerned but it doesn't concern them. The easiest way to remain compliant in such an arrangement is to not use their infrastructure. As I expressed in my irrelevant waffle.
That's actually good to know, many thanks, as a concern of mine was that the kit installed may not have the appropriate DNO certification approval. So informing the DNO, if only for them to update their records could/should(?) include the SSEG in question.chris_n wrote: ↑Mon Jul 07, 2025 2:02 pmDespite wading through a lot of irrelevant and often incorrect waffle I thought it might be of interest to let you know that in Austria and probably most of the rest of Europe you still have to notify the electricity supply company even with small systems. I haven't heard of anyone being refused such a system.Mart wrote: ↑Sun Jul 06, 2025 1:47 pmMatter to the DNO, the whole point as I understand it, regarding permission for the addition of a grid-tied SSEG to the local network, without the need for any approval.
As I understand it, much of Europe has this permission, the UK doesn't. I'm not saying the UK is wrong, but if it revues the situation, and decides that these upto 800W(AC) PV systems can be allowed, then my question was to follow the logic, and suggest/ask if that leads to other varieties of 800W(AC) plug in devices.
PS Stinsy keep calling the effluent out even though you missed a few![]()
Wow, you've gone full BS.Saladin wrote: ↑Mon Jul 07, 2025 1:29 pmIt all relates to the addition of a 2 -3 panel system.
This I misunderstood. I thought you wanted to export it. If it's not leaving your house it doesn't concern the DNO.
If you import 15kWh that cost the planet between 35kWh & 70kWh from a central national powerplant. factoring losses in energy conversion & transmission.
Base load is usually FF
Australia supplies most of the world. Port Talbot use it for steel.
Agreed hence I said 1500W. Is that irrelevant? I don't think so.Joeboy wrote: ↑Mon Jul 07, 2025 8:42 am The systems I have rarely if ever hit 800W generation and that is from 1000W of panels. Generally it will peak at 700 to 750W. There is no discernible heat from any of the components at that level. As we have experience with the arc of the day it is unless perfectly positioned and in orientation too unlikely that even that 750W generation will run all day. The other systems are less than 1000W and of no worry to me at all.
To me it's suggesting people put them in less than ideal shadey areas where their potential becomes curtailed. Ground mounts aren't often shaded by buildings.
The moment it becomes my way or the highway then that becomes stiffling and a constraint on innovation & participation.
I'd not agree they are perfect. They are protecting a state monopoly and the privatisation of the means of production too.
I ran a Soladin for a while with a 550W array...back in the old place.
Right lemon it was.
Turns on when the array produces 1W. Uses 30W self-consumption = 29W load in shadow.
My shaded low roof panels didn't get light until after midday then spent most of the rest of the day making up for the losses.
Sunny boys are better. The won't operate until after they can power themselves.
Was going to do the same with a big spare panel i had MrPablo when i replaced all of mine to match a while back.MrPablo wrote: ↑Mon Jul 07, 2025 4:25 pm I have 3 panels mounted on a south facing wall of my house, between the ground floor and upper windows. They are, to all intents and purposes, a balcony setup without a balcony.
3 panels, each rated at 410w. Over the last 12 complete months they have generated 804kWh, with the worst month being December at 15kWh.
These panels are not super high tech, the mounting system is mostly treated timber but they still handle loads of my base load.
The more low cost, low complexity systems that we can get on houses, flats, etc, the better.
Why don't you use a 5kW DC charge controller onto your pylontech? DNO wouldn't care about that? No extra inverters just a whole lottov power.
I forgot to mention it started over-temp derating at ~450W too
To both of you. Well done!resybaby wrote: ↑Mon Jul 07, 2025 4:42 pmWas going to do the same with a big spare panel i had MrPablo when i replaced all of mine to match a while back.MrPablo wrote: ↑Mon Jul 07, 2025 4:25 pm I have 3 panels mounted on a south facing wall of my house, between the ground floor and upper windows. They are, to all intents and purposes, a balcony setup without a balcony.
3 panels, each rated at 410w. Over the last 12 complete months they have generated 804kWh, with the worst month being December at 15kWh.
These panels are not super high tech, the mounting system is mostly treated timber but they still handle loads of my base load.
The more low cost, low complexity systems that we can get on houses, flats, etc, the better.
Over ordered a spare one and kept it in the spare room (God they are big when closer), just recently took the decision to abort that plan however and sell it on as unlikely i'll get it done in reality. Sat on a huge Merc Sprinter campers roof now. Also shifted all my 2011 21 x 190w Upsolars locally for £20/each via Gumtree, happy with that.
This chap picked up five of them to power his private garden toy railway installation, all up and running now.
Looe Garden Railway
https://www.facebook.com/people/Looe-Ga ... 356243656/
DNO would care, and you'd be required to notify them.