Induction hob

Energy efficient construction methods and insulation
User avatar
Joeboy
Posts: 8094
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Induction hob

#131

Post by Joeboy »

Stinsy wrote: Mon Aug 29, 2022 6:45 pm No heating on in our house until November. No matter the weather!
I used to be like that then I kind of slumped into a happier mental place. 8-)
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
User avatar
Joeboy
Posts: 8094
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Induction hob

#132

Post by Joeboy »

Oldgreybeard wrote: Mon Aug 29, 2022 6:23 pm That shows the North/South divide! Aircon has been on all day here, reached around 25°C outside, sitting at around 21° indoors. Definitely not time to put any heating on yet! We usually turn the heating on around mid-November, with it going on all the time from around December through to February.
Sadly I can't speak to you again. :lol: :mrgreen:
TBH,.I love the challenges of the off season. WAY more fun!
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
openspaceman
Posts: 662
Joined: Mon Mar 21, 2022 7:37 pm

Re: Induction hob

#133

Post by openspaceman »

Mr Gus wrote: Mon Aug 29, 2022 3:37 pm Whilst the celotex hay box is a classic but with a modern twist, I would be wary of non sealed (alu-tape) particulate from any insulation foam board.
Yes it adds cost, but adds durability & a measure of safety, if done on the cheap 151brand in pound type stores for enough to deal that up.
Yes I am sure you are right and I shall do as you suggest.

I am generally wary of causing more plastic waste and when I hollowed it out with a sharp spoon over the dustbin I did note how difficult it was to avoid some blowing away, also there was electrostatic attraction to deal with too.

My preferred insulation is rockwool batts but you do need twice the thickness. I plan to add some to the rafters and fix multifoil over that but I do need to allow some internal circulation behind because this old roof is unvented.
Morso S11
FIT
16 Sharp PV panels facing WSW 4kW
Solarmax 4200S inverter
Non FIT
3 Canadian solar DC coupled 1.75kW facing SSE
Storage
Growatt SPA3000TL BL inverter ac coupled
Growatt GBLI6532 6.5kWh lithium phosphate battery
Mr Gus
Posts: 3813
Joined: Sun Jun 13, 2021 9:42 pm
Location: Tofu eaters paradise (harrumph)

Re: Induction hob

#134

Post by Mr Gus »

I've done plenty of wee jobs with the 151 brand tape, screwfix is often cheap too, the crumbs I tend to bag for it I need to build an area up when "jigsaw puzzle making" pieces fit from.skip diving.

I love the haybox idea & it's an area we went deep diving into at t'other place.

It would be helpful If there were a few alu-tape covered insulation inner pot moulds for the instant pot range, would really help knock energy back further, the sous vide wand manufacturers like to flog you big clear plastic troughs for lots of cash instead, I just want an extension of energy efficiency & less heat cycles per cook, ..The water I change once per week, less if eggs haven't cracked the shells when cooking low & slow.

I am just going to have to bite the bullet & sacrifice some decent offcuts to make it round & less body than my mk1 insulation cosy.
1906 ripplewatts @wind Turb-ine-erry
It's the wifes Tesla 3 (she lets me wash it)
Leaf 24
Celotex type insulation stuffed most places
Skip diver to the gentry
Austroflamm WBS
A finger of solar + shed full more
User avatar
Joeboy
Posts: 8094
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Induction hob

#135

Post by Joeboy »

Well, tomorrow is induction hob day! With fortune on my side we will be properly gas free and SWMBO can have the joy of NOT just two induction rings to cook. Going to keep the two ring mobile unit too so we will be a six induction ring potential cook at Christmas. :)

Image
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Mr Gus
Posts: 3813
Joined: Sun Jun 13, 2021 9:42 pm
Location: Tofu eaters paradise (harrumph)

Re: Induction hob

#136

Post by Mr Gus »

No comment on the brand name. :evil: Diarr(e)a ..nope, not me sir :D
1906 ripplewatts @wind Turb-ine-erry
It's the wifes Tesla 3 (she lets me wash it)
Leaf 24
Celotex type insulation stuffed most places
Skip diver to the gentry
Austroflamm WBS
A finger of solar + shed full more
User avatar
Joeboy
Posts: 8094
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Induction hob

#137

Post by Joeboy »

Mr Gus wrote: Wed Sep 21, 2022 9:23 pm No comment on the brand name. :evil: Diarr(e)a ..nope, not me sir :D
It's a C mate. :)
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Mr Gus
Posts: 3813
Joined: Sun Jun 13, 2021 9:42 pm
Location: Tofu eaters paradise (harrumph)

Re: Induction hob

#138

Post by Mr Gus »

Yeah. But I haven't got a cheap Turkish optometrist 😆 my eyes? 14/ 12 vision ...probably.
1906 ripplewatts @wind Turb-ine-erry
It's the wifes Tesla 3 (she lets me wash it)
Leaf 24
Celotex type insulation stuffed most places
Skip diver to the gentry
Austroflamm WBS
A finger of solar + shed full more
Adokforme
Posts: 621
Joined: Sun Sep 19, 2021 10:09 pm

Re: Induction hob

#139

Post by Adokforme »

Joeboy wrote: Wed Sep 21, 2022 8:43 pm Well, tomorrow is induction hob day! With fortune on my side we will be properly gas free and SWMBO can have the joy of NOT just two induction rings to cook. Going to keep the two ring mobile unit too so we will be a six induction ring potential cook at Christmas. :)

Image
If it's as good as ours, which is made in Germany and begins with the letter B then reckon Swmbo will be delighted. Not only with it's operation, but cleaning is just so easy compared to the old gas rings, grills etc. We certainly wouldn't go back to a gas one now.
Another poke in the eye for dear ol' Vlad into the bargain! :mrgreen:
User avatar
Joeboy
Posts: 8094
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Induction hob

#140

Post by Joeboy »

Adokforme wrote: Wed Sep 21, 2022 10:02 pm
Joeboy wrote: Wed Sep 21, 2022 8:43 pm Well, tomorrow is induction hob day! With fortune on my side we will be properly gas free and SWMBO can have the joy of NOT just two induction rings to cook. Going to keep the two ring mobile unit too so we will be a six induction ring potential cook at Christmas. :)

Image
If it's as good as ours, which is made in Germany and begins with the letter B then reckon Swmbo will be delighted. Not only with it's operation, but cleaning is just so easy compared to the old gas rings, grills etc. We certainly wouldn't go back to a gas one now.
Another poke in the eye for dear ol' Vlad into the bargain! :mrgreen:
Thank you very much AD, job done and very happy with the outcome. SWMBO likes and said 'Yep, you're doing the cooking now'! :D
Great fun test boiling small volumes of 💧.

Image

Image

Also found a HUGE hole leading to the crawlspace. Cut and siliconed a board in place The task of insulation never ends!

Image
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Post Reply