Cleaning panels

User avatar
Joeboy
Posts: 8005
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Cleaning panels

#11

Post by Joeboy »

Oliver90owner wrote: Mon Oct 03, 2022 9:17 am I whizzed off an enquiry to bilthamber late last evening.

Got a reply this morning recommending their Surfex HD product for this application. A very good response time. I was impressef.
Good to hear, not used that one but the spec sheet looks good.
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Moxi
Posts: 2198
Joined: Sun Oct 31, 2021 3:46 pm

Re: Cleaning panels

#12

Post by Moxi »

Nowty - this sounds like a perfect outlet for your industrial deionised water production facility :lol:

Moxi
Oliver90owner
Posts: 392
Joined: Wed Jun 16, 2021 3:48 pm

Re: Cleaning panels

#13

Post by Oliver90owner »

I reckon a window cleaner would likely charge at least £90 just to clean these panels!

The deionised water is a bit of a red herring - like nitrogen in your car tyres. It’s going to rain on them shortly, probably bringing with it some Sahara sand, industrial pollution, etc. Normal tap water squeegeed off will leave the panels virtually dry. I’ve only rinsed mine off with tap water - and ours is fairly hard.

The surfex looks about half the price of the touchless foam?

Right, more roof brackets up this afternoon. I might even get a pic of his worst panel - for here and for him next door.
User avatar
Joeboy
Posts: 8005
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Cleaning panels

#14

Post by Joeboy »

Oliver90owner wrote: Mon Oct 03, 2022 2:13 pm I reckon a window cleaner would likely charge at least £90 just to clean these panels!

The deionised water is a bit of a red herring - like nitrogen in your car tyres. It’s going to rain on them shortly, probably bringing with it some Sahara sand, industrial pollution, etc. Normal tap water squeegeed off will leave the panels virtually dry. I’ve only rinsed mine off with tap water - and ours is fairly hard.

The surfex looks about half the price of the touchless foam?

Right, more roof brackets up this afternoon. I might even get a pic of his worst panel - for here and for him next door.
To be clear, I bought the touchless as it has no wax in it. The gentle effective way it lifts dirt is a bonus which seems to have some legs in PV world. Looking forward to hearing how it goes for you in surfex mode.
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Oliver90owner
Posts: 392
Joined: Wed Jun 16, 2021 3:48 pm

Re: Cleaning panels

#15

Post by Oliver90owner »

It’s not really my problem at all. Next door can arrange for cleaning (or even doing nothing - I don’t really care either way).

If he asks me to help, things may change. I will be able to reach my panels, for a regular clean, from my side of our boundary. But there is no way that I will be trying to scrub off lichen patches like he has on his panels!
User avatar
Joeboy
Posts: 8005
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Cleaning panels

#16

Post by Joeboy »

Oliver90owner wrote: Mon Oct 03, 2022 3:17 pm It’s not really my problem at all. Next door can arrange for cleaning (or even doing nothing - I don’t really care either way).

If he asks me to help, things may change. I will be able to reach my panels, for a regular clean, from my side of our boundary. But there is no way that I will be trying to scrub off lichen patches like he has on his panels!
OK then, good to know!! :roll:
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Oldgreybeard
Posts: 1873
Joined: Thu Sep 09, 2021 3:42 pm
Location: North East Dorset

Re: Cleaning panels

#17

Post by Oldgreybeard »

Oliver90owner wrote: Mon Oct 03, 2022 2:13 pm I reckon a window cleaner would likely charge at least £90 just to clean these panels!

The deionised water is a bit of a red herring - like nitrogen in your car tyres. It’s going to rain on them shortly, probably bringing with it some Sahara sand, industrial pollution, etc. Normal tap water squeegeed off will leave the panels virtually dry. I’ve only rinsed mine off with tap water - and ours is fairly hard.

The surfex looks about half the price of the touchless foam?

Right, more roof brackets up this afternoon. I might even get a pic of his worst panel - for here and for him next door.
The dionised water makes a tremendous difference to the windows, means they dry with no streaks or water spots. I tried it when rinsing my car once ("borrowed" some from the window cleaner) and it was just as dramatic, no need to leather the car after rinsing as it just dried with no marks at all. Our water here is pretty hard, though, and it may well be that those in softer water areas don't have issues with water marking when it dries.
25 off 250W Perlight solar panels, installed 2014, with a 6kW PowerOne inverter, about 6,000kWh/year generated
6 off Pylontech US3000C batteries, with a Sofar ME3000SP inverter
Oliver90owner
Posts: 392
Joined: Wed Jun 16, 2021 3:48 pm

Re: Cleaning panels

#18

Post by Oliver90owner »

The dionised water makes a tremendous difference to the windows,

Are we really that bothered about the absolutely minimal amount of water remaining, on a flat surface, after properly removing any droplets with a squeegee?

The windscreen wipers on the car do a pretty good job at that. This problem is nothing to do with the last one per cent, or less, it’s about removing large areas of lichen. I know how resistant (to removal) these patches can be.

In biblical terms, this could be compared to planks and sawdust - not micrograms of calcium bicarbonate.🙂
smegal
Posts: 289
Joined: Fri Apr 08, 2022 7:51 pm

Re: Cleaning panels

#19

Post by smegal »

Wash then rinse your car without drying it (better in the summer) and see what water marks you get with tap water.

It really is noticeable.
Oldgreybeard
Posts: 1873
Joined: Thu Sep 09, 2021 3:42 pm
Location: North East Dorset

Re: Cleaning panels

#20

Post by Oldgreybeard »

smegal wrote: Tue Oct 04, 2022 7:58 am Wash then rinse your car without drying it (better in the summer) and see what water marks you get with tap water.

It really is noticeable.
It is indeed, and what's worse is that the dried rings of carbonates from the water very often adhere extremely well to surfaces and sets very hard when it forms. I suppose if anyone needs evidence of that they only need to look at calcite formation in caves etc. Bigger scale, but the same issue if you live in a hard water area. All of the window cleaners around here, bar none, have water tanks in their vans with DI water in them for rinsing. The only reason they go to this expense is because it saves them a great deal of time, in that they don't have to hand dry every window to get the hard water completely off.
25 off 250W Perlight solar panels, installed 2014, with a 6kW PowerOne inverter, about 6,000kWh/year generated
6 off Pylontech US3000C batteries, with a Sofar ME3000SP inverter
Post Reply