Pylontech - Servtec console software

Tinbum
Posts: 1112
Joined: Mon May 31, 2021 9:55 pm

Re: Pylontech - Servtec console software

#11

Post by Tinbum »

Their are 2 cables and links.
85no 58mm solar thermal tubes, 28.5Kw PV, 3x Sunny Island 5048, 2795 Ah (135kWh) (c20) Rolls batteries 48v, 8kWh Growatt storage, 22 x US3000C Pylontech, Sofar ME3000's, Brosley wood burner and 250lt DHW
User avatar
nowty
Posts: 5747
Joined: Mon May 31, 2021 2:36 pm
Location: South Coast

Re: Pylontech - Servtec console software

#12

Post by nowty »

Lincs Robert wrote: Wed Oct 19, 2022 9:43 am
Tinbum wrote: Wed Oct 19, 2022 9:02 am Its really not hard at all and would probably cost about £10. I'll send some links when I'm near my computer.
Thanks. I note that this will take it to a 9 way d type, whereas the connection on the US2000C is a RJ45 I think?
Read Tinbum's post carefully, you will end up with a RJ45 on one end and a USB on the other.

One 9 Way D type socket end will go into the bin.

The 9 way D type plug and socket will just plug into each other back to back if I'm reading it right.
16.9kW PV > 109MWh generated
Ripple 6.6kW Wind + 4.5kW PV > 25MWh generated
5 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 510 m3
Tinbum
Posts: 1112
Joined: Mon May 31, 2021 9:55 pm

Re: Pylontech - Servtec console software

#13

Post by Tinbum »

nowty wrote: Wed Oct 19, 2022 9:50 am
Lincs Robert wrote: Wed Oct 19, 2022 9:43 am
Tinbum wrote: Wed Oct 19, 2022 9:02 am Its really not hard at all and would probably cost about £10. I'll send some links when I'm near my computer.
Thanks. I note that this will take it to a 9 way d type, whereas the connection on the US2000C is a RJ45 I think?
Read Tinbum's post carefully, you will end up with a RJ45 on one end and a USB on the other.

One 9 Way D type socket end will go into the bin.

The 9 way D type plug and socket will just plug into each other back to back if I'm reading it right.
Yes. You do need to check which 3 cores you need to connect into the RJ45- they are different depending which half of the modem cable you use. I do have the colours noted down somewhere.
85no 58mm solar thermal tubes, 28.5Kw PV, 3x Sunny Island 5048, 2795 Ah (135kWh) (c20) Rolls batteries 48v, 8kWh Growatt storage, 22 x US3000C Pylontech, Sofar ME3000's, Brosley wood burner and 250lt DHW
User avatar
nowty
Posts: 5747
Joined: Mon May 31, 2021 2:36 pm
Location: South Coast

Re: Pylontech - Servtec console software

#14

Post by nowty »

By a strange coincidence, the ebay cable Lincs Robert first posted about had already been purchased by myself although had not arrived at that point. I would have followed Tinbum's advice if I had not already ordered it but having had it delivered today and using it, I was kind of glad I bought the off the shelf kit as I'm sure its saved me quite some time and swearing.

The software and a foolproof guide comes with it on a USB stick and a console adapter is supplied so I can use it on both my US2000B's and my latest US2000C's.
Image


Having replaced my master battery for a US2000C in the last couple of days, I now have a spare US2000 Plus battery to offload so it was quite timely to test the device on it.
Image


All cells nicely balanced. :D
Image


5 years old, 271 cycles and SOH still at 99%, the batteries at Nowty Towers do have an easy life being in such a large battery pack. 8-)
Image
16.9kW PV > 109MWh generated
Ripple 6.6kW Wind + 4.5kW PV > 25MWh generated
5 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 510 m3
Lincs Robert
Posts: 214
Joined: Fri Mar 11, 2022 7:48 pm
Location: Lincolnshire

Re: Pylontech - Servtec console software

#15

Post by Lincs Robert »

Tinbum wrote: Wed Oct 19, 2022 9:55 am
nowty wrote: Wed Oct 19, 2022 9:50 am
Lincs Robert wrote: Wed Oct 19, 2022 9:43 am

Thanks. I note that this will take it to a 9 way d type, whereas the connection on the US2000C is a RJ45 I think?
Read Tinbum's post carefully, you will end up with a RJ45 on one end and a USB on the other.

One 9 Way D type socket end will go into the bin.

The 9 way D type plug and socket will just plug into each other back to back if I'm reading it right.
Yes. You do need to check which 3 cores you need to connect into the RJ45- they are different depending which half of the modem cable you use. I do have the colours noted down somewhere.
Thanks - I’d work it out from a combination of the pin outs & first principles with a multimeter 👍
Tinbum
Posts: 1112
Joined: Mon May 31, 2021 9:55 pm

Re: Pylontech - Servtec console software

#16

Post by Tinbum »

Lincs Robert wrote: Fri Oct 21, 2022 3:58 pm Thanks - I’d work it out from a combination of the pin outs & first principles with a multimeter 👍
That's how I did it.

After nowty's post don't worry it is all very easy and it will save you £40. :D :D :D :D
85no 58mm solar thermal tubes, 28.5Kw PV, 3x Sunny Island 5048, 2795 Ah (135kWh) (c20) Rolls batteries 48v, 8kWh Growatt storage, 22 x US3000C Pylontech, Sofar ME3000's, Brosley wood burner and 250lt DHW
User avatar
nowty
Posts: 5747
Joined: Mon May 31, 2021 2:36 pm
Location: South Coast

Re: Pylontech - Servtec console software

#17

Post by nowty »

Tinbum wrote: Fri Oct 21, 2022 5:16 pm After nowty's post don't worry it is all very easy and it will save you £40. :D :D :D :D
:cry:

I'm very impressed though, with the info the Pylontechs give you. :ugeek:
16.9kW PV > 109MWh generated
Ripple 6.6kW Wind + 4.5kW PV > 25MWh generated
5 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 510 m3
Lincs Robert
Posts: 214
Joined: Fri Mar 11, 2022 7:48 pm
Location: Lincolnshire

Re: Pylontech - Servtec console software

#18

Post by Lincs Robert »

nowty wrote: Fri Oct 21, 2022 5:27 pm
Tinbum wrote: Fri Oct 21, 2022 5:16 pm After nowty's post don't worry it is all very easy and it will save you £40. :D :D :D :D
:cry:

I'm very impressed though, with the info the Pylontechs give you. :ugeek:
In a former life I was a field engineer and used to spend all day working with problematic serial interfaces. There’s a fail safe process which if followed gives success 🤞
Swwils
Posts: 547
Joined: Sat Feb 26, 2022 12:58 pm

Re: Pylontech - Servtec console software

#19

Post by Swwils »

It's not that easy of you have a original PYLONTECH.
Lincs Robert
Posts: 214
Joined: Fri Mar 11, 2022 7:48 pm
Location: Lincolnshire

Re: Pylontech - Servtec console software

#20

Post by Lincs Robert »

nowty wrote: Fri Oct 21, 2022 3:56 pm By a strange coincidence, the ebay cable Lincs Robert first posted about had already been purchased by myself although had not arrived at that point. I would have followed Tinbum's advice if I had not already ordered it but having had it delivered today and using it, I was kind of glad I bought the off the shelf kit as I'm sure its saved me quite some time and swearing.

The software and a foolproof guide comes with it on a USB stick and a console adapter is supplied so I can use it on both my US2000B's and my latest US2000C's.
Image


Having replaced my master battery for a US2000C in the last couple of days, I now have a spare US2000 Plus battery to offload so it was quite timely to test the device on it.
Image


All cells nicely balanced. :D
Image


5 years old, 271 cycles and SOH still at 99%, the batteries at Nowty Towers do have an easy life being in such a large battery pack. 8-)
Image
That’s really interesting. I’m intrigued that a battery which is 5 years old would have such a low number of cycles though. This prompts a question as to exactly what is a cycle? Answers on a postcard ?
Post Reply