new panel hydrophobic coating.

Post Reply
Gareth J
Posts: 173
Joined: Sun Oct 24, 2021 9:11 am

new panel hydrophobic coating.

#1

Post by Gareth J »

See attached picture. Top left panel was replaced end of the summer. The only other difference between it and the others, new in march, were that the others were cleaned a couple of times, as the window cleaner passed.

Conclusions;
-Panels must be coated with something water repellant from the factory.
-whatever it is on there is capable of withstanding a winter, including snow, but not a washing by whatever the window cleaner used.

Ponderings;
-does the water beading off help? Or maybe even hinder?
-maybe it's not deliberate but something manufacturing related.
-does anyone apply anything to previously cleaned panels? There are some shower door protective coatings that would do similar.

Image

Apologies for the rubbish picture
dan_b
Posts: 2288
Joined: Tue Jun 15, 2021 10:16 am
Location: SW London

Re: new panel hydrophobic coating.

#2

Post by dan_b »

Maybe next time wash them with some car shampoo with a wax additive
Tesla Model 3 Performance
Oversees an 11kWp solar array at work
Thebeeman
Posts: 221
Joined: Tue Jun 14, 2022 8:56 am

Re: new panel hydrophobic coating.

#3

Post by Thebeeman »

A search for Rain-X may be the answer to what you are looking for.
Swwils
Posts: 557
Joined: Sat Feb 26, 2022 12:58 pm

Re: new panel hydrophobic coating.

#4

Post by Swwils »

Newer panels can have an anti fogging additive that slowly leeches out and it serves to maximise the surface energy of the panel to help with condensation effects.
Gareth J
Posts: 173
Joined: Sun Oct 24, 2021 9:11 am

Re: new panel hydrophobic coating.

#5

Post by Gareth J »

https://solvoltaics.com/use-rain-x-solar-panels/

Meh, can't say I'm really that bothered. In the drizzle days we do regularly get here, what's marginally better - a thin film of water all over? Or a load of droplets? And what dries quicker? My panels are too shallow to shed water well.

Just thought it interesting
User avatar
Joeboy
Posts: 8096
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: new panel hydrophobic coating.

#6

Post by Joeboy »

Gareth J wrote: Fri Feb 24, 2023 6:13 pm https://solvoltaics.com/use-rain-x-solar-panels/

Meh, can't say I'm really that bothered. In the drizzle days we do regularly get here, what's marginally better - a thin film of water all over? Or a load of droplets? And what dries quicker? My panels are too shallow to shed water well.

Just thought it interesting
I'd have thought rain x would be worth a test? Or even a spray silicone but maybe not? I used RS spray silicone offshore and always impressed with its incidental hydrophobic qualities. In saying that, I'd not try either myself.
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Gareth J
Posts: 173
Joined: Sun Oct 24, 2021 9:11 am

Re: new panel hydrophobic coating.

#7

Post by Gareth J »

Joeboy wrote: Sat Feb 25, 2023 4:33 am
I'd have thought rain x would be worth a test? Or even a spray silicone but maybe not? I used RS spray silicone offshore and always impressed with its incidental hydrophobic qualities. In saying that, I'd not try either myself.
[/quote]

I guess you'd be pretty unlucky if some of the solvents in rainx were both attacking whatever glue is used between panel and glass AND around in sufficient quantities to do any meaningful damage. Either way, I'm not scrabbling around up there attempting to rub rainx about. They can get a wipe over if they look grotty when the window cleaners are around.
User avatar
Joeboy
Posts: 8096
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: new panel hydrophobic coating.

#8

Post by Joeboy »

Gareth J wrote: Sat Feb 25, 2023 4:36 pm
Joeboy wrote: Sat Feb 25, 2023 4:33 am
I'd have thought rain x would be worth a test? Or even a spray silicone but maybe not? I used RS spray silicone offshore and always impressed with its incidental hydrophobic qualities. In saying that, I'd not try either myself.
I guess you'd be pretty unlucky if some of the solvents in rainx were both attacking whatever glue is used between panel and glass AND around in sufficient quantities to do any meaningful damage. Either way, I'm not scrabbling around up there attempting to rub rainx about. They can get a wipe over if they look grotty when the window cleaners are around.
[/quote]


I said this last year. No touch bilt hamber snowfoam fairly strips the biological off.

Takes care of that edge build up. Beyond that potential infraction I don't worry.
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Mr Gus
Posts: 3813
Joined: Sun Jun 13, 2021 9:42 pm
Location: Tofu eaters paradise (harrumph)

Re: new panel hydrophobic coating.

#9

Post by Mr Gus »

Well, there is a potentially small but growing market hole for "specialist" cleaning product there then boys! . .or look over the pond at germany who will have that slot filled "generally" if not specifically.

Seeing as their uptake of solar outstrips ours, that's where I'd google & translate, plus peruse data sheets 😉
1906 ripplewatts @wind Turb-ine-erry
It's the wifes Tesla 3 (she lets me wash it)
Leaf 24
Celotex type insulation stuffed most places
Skip diver to the gentry
Austroflamm WBS
A finger of solar + shed full more
Mr Gus
Posts: 3813
Joined: Sun Jun 13, 2021 9:42 pm
Location: Tofu eaters paradise (harrumph)

Re: new panel hydrophobic coating.

#10

Post by Mr Gus »

https://ratedpower.com/blog/clean-solar-panels/

"Solar maintenance companies like US-based Bland Company and Premier Solar Cleaning have found that using deionized water with a rolling or vehicle-mounted brush allows them to clean panels without using soap, which leaves a residue that not only shades panels but attracts dirt.

Lubricant manufacturer Polywater produces a Solar Panel Wash to help water lift off grime without leaving a film behind. SunSystem Technology uses a blend of diluted vinegar and hydrogen peroxide to remove dirt"
1906 ripplewatts @wind Turb-ine-erry
It's the wifes Tesla 3 (she lets me wash it)
Leaf 24
Celotex type insulation stuffed most places
Skip diver to the gentry
Austroflamm WBS
A finger of solar + shed full more
Post Reply