DIY Install and MCS accreditation!
Re: DIY Install and MCS accreditation!
Has anyone succeeded with an Outgoing Octopus application using a Flexi-Orb certificate in lieu of MCS?
Re: DIY Install and MCS accreditation!
If you did not need a MCS cert who is to say you even have a PV system. Seems a murky situation from the leccy Co view. And have you seen some of the DIY bodgeups !! Perhaps a lot of people on here can do it but Mr Average?
Re: DIY Install and MCS accreditation!
As I understand it, you only need one MCS approved PV system. Once you have it, that's it, the property has an MCS certificate for PV, and you can add more - you won't ever get or need another certificate.
So what's the cheapest way to get an MCS certificate ?
So what's the cheapest way to get an MCS certificate ?
4kWp solar, EV
Diy: MVHR, 150mm EWI, 15kWh batt, 2.4kW GSHP & no gas
Diy: MVHR, 150mm EWI, 15kWh batt, 2.4kW GSHP & no gas
-
- Posts: 609
- Joined: Mon May 31, 2021 7:16 pm
- Location: ville of spiky things
Re: DIY Install and MCS accreditation!
We spoke to Octopus a couple of weeks ago, apparently MCS accreditation is the only way, they did say a DIY system with MCS is fine. So it would seem if you know a friendly MCS person who is happy to sign the form you are away. Otherwise probably not.
I am wondering if there is a safe, legal, fair way to sell it to my neighbours? Anyone?
Desp
I am wondering if there is a safe, legal, fair way to sell it to my neighbours? Anyone?
Desp
Blah blah blah
Re: DIY Install and MCS accreditation!
Desp,
At the most basic level get your neighbour to buy a battery (or two) and a suitable inverter and you charge his battery and he runs loads from it separate to his grid connections.
Or ignore the batteries and the inverter and run an extension cable with a meter and let the neighbour run a suitable rated load from that - again separate to his own grid connections.
Theres a degree of trust required and adherence to practical safety requirements to be applied but no reason it could not be done.
Moxi
At the most basic level get your neighbour to buy a battery (or two) and a suitable inverter and you charge his battery and he runs loads from it separate to his grid connections.
Or ignore the batteries and the inverter and run an extension cable with a meter and let the neighbour run a suitable rated load from that - again separate to his own grid connections.
Theres a degree of trust required and adherence to practical safety requirements to be applied but no reason it could not be done.
Moxi
Re: DIY Install and MCS accreditation!
You can do it without MCS but you will need to press them.
-
- Posts: 609
- Joined: Mon May 31, 2021 7:16 pm
- Location: ville of spiky things
Re: DIY Install and MCS accreditation!
We pressed Octopus, they said NO.
Cheers Moxi, some good suggestions there, my neighbours are great trust is no worries, I will see what they think.
Desp
Cheers Moxi, some good suggestions there, my neighbours are great trust is no worries, I will see what they think.
Desp
Blah blah blah
Re: DIY Install and MCS accreditation!
I would like to think my constant moaning had a little effect!!
https://octopus.typeform.com/to/UAbK9bR ... ource=t.co
https://octopus.typeform.com/to/UAbK9bR ... ource=t.co
14Kw Mitsubishi Ecodan ASHP
22 x JA Solar 455W Mono Perc Half Cell Silvers
Solis 8.0Kw 5G Dual MPPT Inverter
13.5Kw Tesla Powerwall
Zappi 2 Charger
iBoost
22 x JA Solar 455W Mono Perc Half Cell Silvers
Solis 8.0Kw 5G Dual MPPT Inverter
13.5Kw Tesla Powerwall
Zappi 2 Charger
iBoost
Re: DIY Install and MCS accreditation!
Looks like Octopus are starting to allow non-MCS in a more meaningful way.
https://octopus.energy/policies/export- ... onditions/
Clause 5.8 states:
'Where you are unable to provide MCS or equivalent certification under clause 5.5, you confirm that you are satisfied that the generation asset has been installed by a competent professional and meets all required industry standards and guidelines. Octopus accepts no liability for any loss, damage or injury resulting from the installation'
https://octopus.energy/policies/export- ... onditions/
Clause 5.8 states:
'Where you are unable to provide MCS or equivalent certification under clause 5.5, you confirm that you are satisfied that the generation asset has been installed by a competent professional and meets all required industry standards and guidelines. Octopus accepts no liability for any loss, damage or injury resulting from the installation'
10x 405W JA Solar panels (4.05kWp) @ 5 degrees
3x 405W Longi panels (1.22kWp) @ 90 degrees
16.5kWh DIY LifePo4 battery
Solis inverter/charger
0.6kW Ripple WT
64kWh Kia E-Niro
3x 405W Longi panels (1.22kWp) @ 90 degrees
16.5kWh DIY LifePo4 battery
Solis inverter/charger
0.6kW Ripple WT
64kWh Kia E-Niro
Re: DIY Install and MCS accreditation!
Needs to be some form of compliance monitoring, surely? Otherwise, in the extreme, what would stop me rigging up an old lister diesel, running it on waste motor oil and selling back to the grid as "renewables".