ASHP - reverse valve settings
ASHP - reverse valve settings
Does anyone know how I can get access to the settings to operate the reverse valve on our Mitsubishi Ecodan Heat pumps.
I gather from previous comments, Mitsubishi don’t allow the reverse valve function in the UK but do allow the feature in Europe and the rest of the world.
The lowest temp I can set on our pumps is 25c and I would like to set it lower.
I gather from previous comments, Mitsubishi don’t allow the reverse valve function in the UK but do allow the feature in Europe and the rest of the world.
The lowest temp I can set on our pumps is 25c and I would like to set it lower.
Mitsubishi Ecodan
ASHP 8.5kW x 2
12 x 460w Solar panels
9.5kWh GivEnergy
Batteries x 2
EVs x 4 210 kWh Batteries
Ripple 5.8 kW PV 0.547 kW Whitelaw Brae
ASHP 8.5kW x 2
12 x 460w Solar panels
9.5kWh GivEnergy
Batteries x 2
EVs x 4 210 kWh Batteries
Ripple 5.8 kW PV 0.547 kW Whitelaw Brae
Re: ASHP - reverse valve settings
Dip ft5.
Will invalidate your RHI and the status is phoned home
Will invalidate your RHI and the status is phoned home
Re: ASHP - reverse valve settings
Thanks swwills.
What’s the RHI?|
Status phoned home
What’s the RHI?|
Status phoned home
Mitsubishi Ecodan
ASHP 8.5kW x 2
12 x 460w Solar panels
9.5kWh GivEnergy
Batteries x 2
EVs x 4 210 kWh Batteries
Ripple 5.8 kW PV 0.547 kW Whitelaw Brae
ASHP 8.5kW x 2
12 x 460w Solar panels
9.5kWh GivEnergy
Batteries x 2
EVs x 4 210 kWh Batteries
Ripple 5.8 kW PV 0.547 kW Whitelaw Brae
Re: ASHP - reverse valve settings
1906 ripplewatts @wind Turb-ine-erry
It's the wifes Tesla 3 (she lets me wash it)
Leaf 24
Celotex type insulation stuffed most places
Skip diver to the gentry
Austroflamm WBS
A finger of solar + shed full more
It's the wifes Tesla 3 (she lets me wash it)
Leaf 24
Celotex type insulation stuffed most places
Skip diver to the gentry
Austroflamm WBS
A finger of solar + shed full more
Re: ASHP - reverse valve settings
Does this help ?,
Apparently there is a DIP Switch to turn on cooling function.
Only if Cooling operation is active (Dip-SW 2-4 ON).
http://www.mitsubishitech.co.uk/Data/Ec ... -E_IM1.pdf
Apparently there is a DIP Switch to turn on cooling function.
Only if Cooling operation is active (Dip-SW 2-4 ON).
http://www.mitsubishitech.co.uk/Data/Ec ... -E_IM1.pdf
18.7kW PV > 109MWh generated
Ripple 6.6kW Wind + 4.5kW PV > 27MWh generated
6 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 510 m3
Ripple 6.6kW Wind + 4.5kW PV > 27MWh generated
6 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 510 m3
Re: ASHP - reverse valve settings
Thanks guys, very helpful
Mitsubishi Ecodan
ASHP 8.5kW x 2
12 x 460w Solar panels
9.5kWh GivEnergy
Batteries x 2
EVs x 4 210 kWh Batteries
Ripple 5.8 kW PV 0.547 kW Whitelaw Brae
ASHP 8.5kW x 2
12 x 460w Solar panels
9.5kWh GivEnergy
Batteries x 2
EVs x 4 210 kWh Batteries
Ripple 5.8 kW PV 0.547 kW Whitelaw Brae
Re: ASHP - reverse valve settings
Could not gauge the emoji (tiny) guessing it's a shrug?
Therefore "phone home" will be a notification to mitsubishi I guess, along with any over air updates, & general operational status data that is sent onward for scrutiny by the manuf!?
Therefore "phone home" will be a notification to mitsubishi I guess, along with any over air updates, & general operational status data that is sent onward for scrutiny by the manuf!?
1906 ripplewatts @wind Turb-ine-erry
It's the wifes Tesla 3 (she lets me wash it)
Leaf 24
Celotex type insulation stuffed most places
Skip diver to the gentry
Austroflamm WBS
A finger of solar + shed full more
It's the wifes Tesla 3 (she lets me wash it)
Leaf 24
Celotex type insulation stuffed most places
Skip diver to the gentry
Austroflamm WBS
A finger of solar + shed full more
Re: ASHP - reverse valve settings
Just got back from abroad and wondering if it is worth trying to set this up now or next summer, cant see many 25c + days left if this summer.nowty wrote: ↑Sat Aug 12, 2023 6:45 pm Does this help ?,
Apparently there is a DIP Switch to turn on cooling function.
Only if Cooling operation is active (Dip-SW 2-4 ON).
http://www.mitsubishitech.co.uk/Data/Ec ... -E_IM1.pdf
My solar isn’t even getting close to April’s generation and I assume that’s not normal.
Mitsubishi Ecodan
ASHP 8.5kW x 2
12 x 460w Solar panels
9.5kWh GivEnergy
Batteries x 2
EVs x 4 210 kWh Batteries
Ripple 5.8 kW PV 0.547 kW Whitelaw Brae
ASHP 8.5kW x 2
12 x 460w Solar panels
9.5kWh GivEnergy
Batteries x 2
EVs x 4 210 kWh Batteries
Ripple 5.8 kW PV 0.547 kW Whitelaw Brae
Re: ASHP - reverse valve settings
That's normal.May and maybe June are the peak months.Yuff wrote: ↑Fri Aug 18, 2023 8:11 amJust got back from abroad and wondering if it is worth trying to set this up now or next summer, cant see many 25c + days left if this summer.nowty wrote: ↑Sat Aug 12, 2023 6:45 pm Does this help ?,
Apparently there is a DIP Switch to turn on cooling function.
Only if Cooling operation is active (Dip-SW 2-4 ON).
http://www.mitsubishitech.co.uk/Data/Ec ... -E_IM1.pdf
My solar isn’t even getting close to April’s generation and I assume that’s not normal.
15kW PV SE, VI, HM, EN
42kWh LFPO4 storage
7kW ASHP
200ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
WBSx2
Low energy bulbs
Veg patches & fruit trees
42kWh LFPO4 storage
7kW ASHP
200ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
WBSx2
Low energy bulbs
Veg patches & fruit trees
Re: ASHP - reverse valve settings
July wasn't 'normal' for me, only 80% of typical generation for the month and only slightly above April's generation. On average over the last 10 years July is almost exactly the same as May for me but not this summer.