![Image](https://i.postimg.cc/Z04GzLng/Screenshot-20240210-104225-com-myenergi.jpg)
Talk me through getting an EV
-
- Posts: 520
- Joined: Sun Jul 18, 2021 11:50 am
Re: Talk me through getting an EV
Beau,
It might be useful to explain what was wrong for the benfit of those that see the same problem in future. Especially useful if it was something simple - you know those things you don't want to admit as others will definitely reproduce them![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
It might be useful to explain what was wrong for the benfit of those that see the same problem in future. Especially useful if it was something simple - you know those things you don't want to admit as others will definitely reproduce them
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Re: Talk me through getting an EV
Yes good point PaulCountrypaul wrote: ↑Sat Feb 10, 2024 12:09 pm Beau,
It might be useful to explain what was wrong for the benfit of those that see the same problem in future. Especially useful if it was something simple - you know those things you don't want to admit as others will definitely reproduce them![]()
I presumed initially the problem was my wiring. Thought maybe the connectors were holding on insulation instead of bare copper. re-checked it all three times
![FacePalm :facepalm:](./images/smilies/Face-Palm.gif)
Asked on a Myenrgi forum and apparently, I needed to switch on the extra CT clamp. I had scrolled through the menu but had seen nothing obvious. I needed to go into the Advanced Settings to unlock it but had been scared of seeing the word advanced the first time around haha
-
- Posts: 520
- Joined: Sun Jul 18, 2021 11:50 am
Re: Talk me through getting an EV
I don't have a Zappi, but do have an Eddi so thought it might be something like that, and I am sure others will find the same as you have.Beau wrote: ↑Sat Feb 10, 2024 3:35 pmYes good point PaulCountrypaul wrote: ↑Sat Feb 10, 2024 12:09 pm Beau,
It might be useful to explain what was wrong for the benfit of those that see the same problem in future. Especially useful if it was something simple - you know those things you don't want to admit as others will definitely reproduce them![]()
I presumed initially the problem was my wiring. Thought maybe the connectors were holding on insulation instead of bare copper. re-checked it all three times![]()
Asked on a Myenrgi forum and apparently, I needed to switch on the extra CT clamp. I had scrolled through the menu but had seen nothing obvious. I needed to go into the Advanced Settings to unlock it but had been scared of seeing the word advanced the first time around haha
Congratulations on solving the problem.