Iboost and buddy or can you go HA
Iboost and buddy or can you go HA
I have ordered an iboost on my new system but need to remote control it. Just on and off, nothing fancy. I thought I could do that through an app that it would come with now I think I need to buy an extra bit of kit for nearly £100.
I have been trying to avoid the whole HA thing, as just getting my laptop to boot up in the morning without loading Bing is more than I can cope with. However being parsimonious at best or more accurately darn right stingy, I am now wondering if the best course of action is the haha route.
Anybody with an iboost who has an opinion would be good to hear it.
I have been trying to avoid the whole HA thing, as just getting my laptop to boot up in the morning without loading Bing is more than I can cope with. However being parsimonious at best or more accurately darn right stingy, I am now wondering if the best course of action is the haha route.
Anybody with an iboost who has an opinion would be good to hear it.
Re: Iboost and buddy or can you go HA
I'm pretty sure Joeboy has a remote controlled switchbot thing to do something similar to what you require.
Edit, just done a search and it is a switchbot that he used to operate his iBoost, currently £29.99 on Amazon.
Edit, just done a search and it is a switchbot that he used to operate his iBoost, currently £29.99 on Amazon.
3.87kWp PV
10.24kWp PV SolarEdge system
Tesla Powerwall 2
100 x 47mm Navitron tubes (still being installed!) Now likely to be removed for more PV.
MK2 PV router DHW diverter
Morso 5kW WBS
Vaillant AroTherm 10kW ASHP
Nissan Leaf
10.24kWp PV SolarEdge system
Tesla Powerwall 2
100 x 47mm Navitron tubes (still being installed!) Now likely to be removed for more PV.
MK2 PV router DHW diverter
Morso 5kW WBS
Vaillant AroTherm 10kW ASHP
Nissan Leaf
Re: Iboost and buddy or can you go HA
Unsure what you want to do?
Iboost diverts surplus solar to immersion heater.
What are you wanting to turn on/off ?
Or what am I missing ?
George
Iboost diverts surplus solar to immersion heater.
What are you wanting to turn on/off ?
Or what am I missing ?
George
1750w Vertical PV micro inverters
3800w almost horizontal/south
Aarrow Becton 7 Woodburner
Dream 3kw ASHP only connected to summer Pool.
Allotment heavy clay.
1.784kw Kirk Hill
0.875kw Derril Water
0.2kwWhitelaw Brae
1kw Harlow Hydro.
3800w almost horizontal/south
Aarrow Becton 7 Woodburner
Dream 3kw ASHP only connected to summer Pool.
Allotment heavy clay.
1.784kw Kirk Hill
0.875kw Derril Water
0.2kwWhitelaw Brae
1kw Harlow Hydro.
Re: Iboost and buddy or can you go HA
I do indeed use a switchbot. I bought then contacted the company for beta software which allows me to select multiple operations in sequence. I set it at 9 ops which wakes up the iboost then runs up the manual timer to 2 hours. It has worked well for years. I then set the number of times I want it to run through the night. Each run is worth 5.6kWh power into the HWT.
15kW PV SE, VI, HM, EN
42kWh LFPO4 storage
7kW ASHP
200ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
WBSx2
Low energy bulbs
Veg patches & fruit trees
42kWh LFPO4 storage
7kW ASHP
200ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
WBSx2
Low energy bulbs
Veg patches & fruit trees
Re: Iboost and buddy or can you go HA
Hi. I want to control when it goes on.....if its better to export electricity and heat on gas, i could arrange that etc.
Thanks for the pointers on the other equipment. Will look into it.
-
- Posts: 580
- Joined: Sun Jul 18, 2021 11:50 am
Re: Iboost and buddy or can you go HA
Why can't you use a standard WiFi switch - possibly with a contactor.
Re: Iboost and buddy or can you go HA
Thats what I use with my supplementary battery charger / exporter.Countrypaul wrote: ↑Wed Jul 31, 2024 7:24 pm Why can't you use a standard WiFi switch - possibly with a contactor.
I programme my Sofar ME3000SP to import during the cheapslot and export at all other times. I just turn it on and off with a WiFi socket controlling a 40A contactor so I can battery charge or battery export whilst away from home. When the WiFi socket is turned off the unit thinks there is a power cut and waits indefinitely until I turn it back on again.
18.7kW PV > 109MWh generated
Ripple 6.6kW Wind + 4.5kW PV > 27MWh generated
6 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 520 m3
Ripple 6.6kW Wind + 4.5kW PV > 27MWh generated
6 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 520 m3
Re: Iboost and buddy or can you go HA
Understand your reasons now.Countrypaul wrote: ↑Wed Jul 31, 2024 7:24 pm Why can't you use a standard WiFi switch - possibly with a contactor.
I second the idea of a wifi switch and relay/contactor.
I use TAPO with no problems......
George
1750w Vertical PV micro inverters
3800w almost horizontal/south
Aarrow Becton 7 Woodburner
Dream 3kw ASHP only connected to summer Pool.
Allotment heavy clay.
1.784kw Kirk Hill
0.875kw Derril Water
0.2kwWhitelaw Brae
1kw Harlow Hydro.
3800w almost horizontal/south
Aarrow Becton 7 Woodburner
Dream 3kw ASHP only connected to summer Pool.
Allotment heavy clay.
1.784kw Kirk Hill
0.875kw Derril Water
0.2kwWhitelaw Brae
1kw Harlow Hydro.
Re: Iboost and buddy or can you go HA
Another vote for Tapo, good kit, easy to operate
Re: Iboost and buddy or can you go HA
Mine comes on/off with a simple manual clock timer fitted between the ac feed and the Iboost itself.
About as simple as it needs to be imv.
About as simple as it needs to be imv.
4.0kw FIT PV solar Sunnyboy 4000tl & 7 x 570w JA solar panels
7.08kw JA Solar panels & Sunsynk ECCO 3.6kw.
7 x US5000 Pylontechs.
4500l RWH
Full Biomass heating system
iBoost HW divertor
Full house internal walls insulation
600min Loft insulation
7.08kw JA Solar panels & Sunsynk ECCO 3.6kw.
7 x US5000 Pylontechs.
4500l RWH
Full Biomass heating system
iBoost HW divertor
Full house internal walls insulation
600min Loft insulation