Another Lister generator problem

User avatar
Joeboy
Posts: 8013
Joined: Mon May 31, 2021 4:22 pm
Location: Inverurie

Re: Another Lister generator problem

#11

Post by Joeboy »

Lister is if I mind right a compression ignition engine with no glow plug? Could do the spill of burning paper trick at the air inlet? Is it particularly cold where you are? Easy start is OK but can be addictive to engines if used too much.

I didn't want to say the other day but you might have blocked the injector with tank debris when it ran dry.

I'd go paperspill (big one), easy start, then both. Then mechanic. :(
19.7kW PV SE, VI, HM, EN & DW
Ripple 7kW WT & Gen to date 19MWh
42kWh LFPO4 storage
95kWh Heater storage
12kWh 210ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
Zoned GCH & Hive 2
WBSx2
Low energy bulbs
Veg patches & fruit trees
Countrypaul
Posts: 561
Joined: Sun Jul 18, 2021 11:50 am

Re: Another Lister generator problem

#12

Post by Countrypaul »

If you want something gentler than easy start, brake/clutch cleaner can be used - much less rattling from the engine as it burns more slowly.
User avatar
Sunrisemike
Posts: 106
Joined: Tue Jun 01, 2021 6:01 pm
Location: Osborne Bay

Re: Another Lister generator problem

#13

Post by Sunrisemike »

Beginning to think that I might have blocked the injector, but then the fuel intake is not right at the bottom of the tank and it flows out of the bleed points. will try a tiny squirt of easy start. Getting the injector out looks tricky in the confined space of the rocker box.
Off grid.
3.9 kw solar panels
6 x solar collectors
40 kWh rolls batteries
Orligno wood gasification boiler
2000 litre storage tank
Lister generator...
spread-tee
Posts: 599
Joined: Mon May 31, 2021 7:16 pm
Location: ville of spiky things

Re: Another Lister generator problem

#14

Post by spread-tee »

I bet you're right Mike about crud in the injector. The mist coming from the exhaust would suggest fuel is getting pumped in to the cylinder but I bet the spray pattern is all mucked up and it wont fire. I had a big old Perkins diesel which was a terror for doing just that, the teeniest bit of grit in the injector would cause mayhem, it turned out to be a small split on the fuel filter element letting gunk through. Those old type injectors are pretty simple to take apart and clean, but you must be scrupulously clean on reassembly and be very careful of the fuel spray, the high pressure makes it very dangerous.
Blah blah blah
User avatar
Sunrisemike
Posts: 106
Joined: Tue Jun 01, 2021 6:01 pm
Location: Osborne Bay

Re: Another Lister generator problem

#15

Post by Sunrisemike »

Thanks for info, I'll take another look at it and maybe find somewhere to give it a clean out. Frustrating!
Off grid.
3.9 kw solar panels
6 x solar collectors
40 kWh rolls batteries
Orligno wood gasification boiler
2000 litre storage tank
Lister generator...
Post Reply