Morning,
Wondering what the groups thoughts/experiences are with adding additional batteries as funds allow, is there a determental affect to the existing/new batteries at all?
Just wondering if anyone has any insight they could share.
Adding additional batteries after initial install
Re: Adding additional batteries after initial install
We added a 5K Pylontech to 1 year old 10.5 K existing, once the BMS sorted itself, no problems.
Re: Adding additional batteries after initial install
There is no problem doing this whatsoever! Me and loads of other people on here have done exactly that.
There are some proprietary systems of battery/inverter where the battery "cannot" be upgraded but I'd avoid those where possible. Certianly Pylontech and other similar systems are simple to upgrade.
12x 340W JA Solar panels (4.08kWp)
3x 380W JA Solar panels (1.14kWp)
5x 2.4kWh Pylontech batteries (12kWh)
LuxPower inverter/charger
(Artist formally known as ******, well it should be obvious enough to those for whom such things are important.)
3x 380W JA Solar panels (1.14kWp)
5x 2.4kWh Pylontech batteries (12kWh)
LuxPower inverter/charger
(Artist formally known as ******, well it should be obvious enough to those for whom such things are important.)
Re: Adding additional batteries after initial install
Appreciate the replies, I was probably overthinking it!
Re: Adding additional batteries after initial install
What do you have at the moment?
12x 340W JA Solar panels (4.08kWp)
3x 380W JA Solar panels (1.14kWp)
5x 2.4kWh Pylontech batteries (12kWh)
LuxPower inverter/charger
(Artist formally known as ******, well it should be obvious enough to those for whom such things are important.)
3x 380W JA Solar panels (1.14kWp)
5x 2.4kWh Pylontech batteries (12kWh)
LuxPower inverter/charger
(Artist formally known as ******, well it should be obvious enough to those for whom such things are important.)
Re: Adding additional batteries after initial install
Nothing, just doing the armour /data/cat6 runs for hybrid inverter in detached garage (30m from Incomer)and was going to go straight for 2x15 kWh batteries
So was just thinking about isolation, back boards, etc and then thought as long as i size right first time, cost effective adding a second unit would be easy but wasn’t sure if it then complicated things hence the first post.
So was just thinking about isolation, back boards, etc and then thought as long as i size right first time, cost effective adding a second unit would be easy but wasn’t sure if it then complicated things hence the first post.