![FacePalm :facepalm:](./images/smilies/Face-Palm.gif)
My bodging way of screwing on the rest of the valve and twisting with a big pipe wrench still worked.
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
No doubt the next time I'll replace any radiators I'll have forgotten both methods.
![Whako :whako:](./images/smilies/Whako.gif)
![Image](https://i.postimg.cc/yYKWDmBx/Radiator-fitting.jpg)
Thats the tool AE. Squared off large allen key thing to remove the tails, most often with a short bit of 22mm copper slipped over it to increase leverage and break the rusted up crud off the tails themselves.AE-NMidlands wrote: ↑Wed Dec 18, 2024 12:43 pmWhen Iast did radiators the valve tails (?) had a big internal hex shape and the "special tool" had a square driver at the other end for screwing in the cast Iron or brass plugs for the tops.
Recovering the scrap fittings out of old rads sometimes needed a big hex spanner around the tool, like a tommy bar... https://plumbingsuppliesdirect.co.uk/mo ... -spanners/
Its up and down, sometimes clear and getting 5kW, the next moment cloudy and lucky to get 1kW. Typically generating between 10kWh and 20kWh per day. Its a little less cold now so less heat demand, but my shading is bad till around mid Feb when potentially things really pick up.
Impressive figures, liking the taking care of it yourself ethos.nowty wrote: ↑Tue Jan 14, 2025 7:29 pmIts up and down, sometimes clear and getting 5kW, the next moment cloudy and lucky to get 1kW. Typically generating between 10kWh and 20kWh per day. Its a little less cold now so less heat demand, but my shading is bad till around mid Feb when potentially things really pick up.
I'm being quite aggressive on the export front, doing two charge and dump cycles a day which is taking a good chunk of the winter bill away.![]()