I’m using pen and paper intermittently at present and could do a lot better!
Integration of different data sets
Integration of different data sets
Hi, does anyone have knowledge of a system which can integrate PV, wind outputs and heat pump usage please?
I’m using pen and paper intermittently at present and could do a lot better!
I’m using pen and paper intermittently at present and could do a lot better!
Proven 6 kWh max turbine, PV 8 KW solar hot water (15 evacuated tubes). Kia eNiro and MG Z5 EV, triple glazing, ground source heat pump and wood stove , Solax PV 5.8 kWp and 17 kWh lithium battery, 5600 litres rainwater storage
Re: Integration of different data sets
What type of integration are you hoping to achieve?
3.87kWp PV
10.24kWp PV SolarEdge system
Tesla Powerwall 2
100 x 47mm Navitron tubes (still being installed!) Now likely to be removed for more PV.
MK2 PV router DHW diverter
Morso 5kW WBS
Vaillant AroTherm 10kW ASHP
Nissan Leaf
10.24kWp PV SolarEdge system
Tesla Powerwall 2
100 x 47mm Navitron tubes (still being installed!) Now likely to be removed for more PV.
MK2 PV router DHW diverter
Morso 5kW WBS
Vaillant AroTherm 10kW ASHP
Nissan Leaf
Re: Integration of different data sets
Excel?
Home assistant is good for this kind of thing if you want it automated.
Home assistant is good for this kind of thing if you want it automated.
12x 340W JA Solar panels (4.08kWp)
3x 380W JA Solar panels (1.14kWp)
5x 2.4kWh Pylontech batteries (12kWh)
LuxPower inverter/charger
(Artist formally known as ******, well it should be obvious enough to those for whom such things are important.)
3x 380W JA Solar panels (1.14kWp)
5x 2.4kWh Pylontech batteries (12kWh)
LuxPower inverter/charger
(Artist formally known as ******, well it should be obvious enough to those for whom such things are important.)