Is G99 approval time sensitive?

User avatar
nowty
Posts: 5794
Joined: Mon May 31, 2021 2:36 pm
Location: South Coast

Re: Is G99 approval time sensitive?

#11

Post by nowty »

Snuggy wrote: Thu Jul 18, 2024 11:34 am
openspaceman wrote: Mon Jul 15, 2024 10:37 pm My original FIT accounted for 3.68kW of that and my application was for an additional 2kW
So does this mean in the worse case scenario of being pulled back to 3.68 or whatever that I can re apply? Hopefully the "rooftop revolution" will improve things as the idea is to get more generation in the south?
Several on here have successfully done their own G99 application and installation. You may need to limit it to 3.68kW export but as I am showing on another thread, I am exporting at 3kW 24 hours a day presently, so it does not necessarily handicap you.
18.7kW PV > 109MWh generated
Ripple 6.6kW Wind + 4.5kW PV > 26MWh generated
5 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 510 m3
Snuggy
Posts: 56
Joined: Tue Jun 18, 2024 3:47 pm

Re: Is G99 approval time sensitive?

#12

Post by Snuggy »

I am paying for an installation and the g99 is part of that. I wont be spending much on batteries, rather investing in an oversized array to start with, therefore ecport durimg the summer is top priority to justify the expense.
User avatar
nowty
Posts: 5794
Joined: Mon May 31, 2021 2:36 pm
Location: South Coast

Re: Is G99 approval time sensitive?

#13

Post by nowty »

Snuggy wrote: Thu Jul 18, 2024 1:23 pm I am paying for an installation and the g99 is part of that. I wont be spending much on batteries, rather investing in an oversized array to start with, therefore ecport durimg the summer is top priority to justify the expense.
Sorry, I'm confusing you with NoraBatty who already has bought a ton of batteries.
18.7kW PV > 109MWh generated
Ripple 6.6kW Wind + 4.5kW PV > 26MWh generated
5 Other RE Coop's
105kWh EV storage
60kWh Home battery storage
40kWh Thermal storage
GSHP + A2A HP's
Rain water use > 510 m3
Snuggy
Posts: 56
Joined: Tue Jun 18, 2024 3:47 pm

Re: Is G99 approval time sensitive?

#14

Post by Snuggy »

Yes, I think thats because we are looking at the same Aiko panels. Obv has good taste!
openspaceman
Posts: 662
Joined: Mon Mar 21, 2022 7:37 pm

Re: Is G99 approval time sensitive?

#15

Post by openspaceman »

Snuggy wrote: Thu Jul 18, 2024 11:34 am
openspaceman wrote: Mon Jul 15, 2024 10:37 pm My original FIT accounted for 3.68kW of that and my application was for an additional 2kW
So does this mean in the worse case scenario of being pulled back to 3.68 or whatever that I can re apply? Hopefully the "rooftop revolution" will improve things as the idea is to get more generation in the south?
Nowty has answered this but the amount you can export is likely calculated on the ability of your substation to take the input without an expensive upgrade, so if all your neighbours have solar panels you are more likely to be limited than if no one other than you has them.

What I meant to convey was that when I requested an extra 2kW they did not account for the fact I already had the 3.68kW from my fit and 3kW from my ac coupled battery =6.68kW but they only allowed for the existing FIT 3.68 and the extra 2kW so 5.68 was on the form. Given that on my best days, like today, I only produce 22-25kWh it is very unlikely I would export more than 3.68

My peak export was 3.27kW today at 15:25 briefly today.
Morso S11
FIT
16 Sharp PV panels facing WSW 4kW
Solarmax 4200S inverter
Non FIT
3 Canadian solar DC coupled 1.75kW facing SSE
Storage
Growatt SPA3000TL BL inverter ac coupled
Growatt GBLI6532 6.5kWh lithium phosphate battery
Post Reply