Kris Harbour tuning a pelton turbine system to 2.5kW
Re: Kris Harbour tuning a pelton turbine system to 2.5kW
15kW PV SE, VI, HM, EN
42kWh LFPO4 storage
7kW ASHP
200ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
WBSx2
Low energy bulbs
Veg patches & fruit trees
42kWh LFPO4 storage
7kW ASHP
200ltr HWT.
73kWh HI5
Deep insulation, air leak ct'd home
WBSx2
Low energy bulbs
Veg patches & fruit trees
Re: Kris Harbour tuning a pelton turbine system to 2.5kW
That was a great watch!
Tesla Model 3 Performance
Oversees an 11kWp solar array at work
Oversees an 11kWp solar array at work
Re: Kris Harbour tuning a pelton turbine system to 2.5kW
Yes indeed, thanks for posting. learning something every day on here. 
Re: Kris Harbour tuning a pelton turbine system to 2.5kW
Love the simplicity of the rotating inlet filter 
4.0kw FIT PV solar SunnyBoy 4000tl & 7 x 570w JA solar panels
7.410kw 13 x 570w JA Solar panels & Sunsynk ECCO 3.6kw.
7 x US5000 Pylontechs.
2 x 3.5kw A2A
4500l RWH
Biomass heating
Iboost divertor
Full house internal walls insu
600min Loft insul
7.410kw 13 x 570w JA Solar panels & Sunsynk ECCO 3.6kw.
7 x US5000 Pylontechs.
2 x 3.5kw A2A
4500l RWH
Biomass heating
Iboost divertor
Full house internal walls insu
600min Loft insul
Re: Kris Harbour tuning a pelton turbine system to 2.5kW
Was anyone else triggered by all the water leaking out of the turbine enclosure though?!
Tesla Model 3 Performance
Oversees an 11kWp solar array at work
Oversees an 11kWp solar array at work
-
Oliver90owner
- Posts: 410
- Joined: Wed Jun 16, 2021 3:48 pm
Re: Kris Harbour tuning a pelton turbine system to 2.5kW
Not sure if the side cover had been fitted for that bit of video. He was resetting the nozzles to maximise the kinetic energy collected by the spoons.
I found the video interesting - not so much ‘tuning’, more like just setting it up properly instead of the original installation using bits and pieces to hand at the time!