Insulating Timber Garage

[AGT]

The inverter will be 8kW so that limits the output too, voltage peaks around 248 and lows of 243 so should be good.

Was 99% on the Sunsynk 8 ke due to the charge/discharge current of 190 amp max just incase the cheap slots get reduced all the info about their app being rubbish is stopping me, also looking at a Solis 8kW now but need to compare

[AGT]

Solid insulation, cut, foamed and foil taped.

Sheep wool insulation in the cheeks

[Fintray]

That'll make a fair improvement in heat retention.

[AGT]

Yep, hope so, back of cigarette pack about 4 times better than original.

Just making improvements as and when i can.

[Stinsy]

The inverter will be 8kW so that limits the output too, voltage peaks around 248 and lows of 243 so should be good.

Was 99% on the Sunsynk 8 ke due to the charge/discharge current of 190 amp max just incase the cheap slots get reduced all the info about their app being rubbish is stopping me, also looking at a Solis 8kW now but need to compare

If your grid voltage doesn’t go above 243V then you’re golden!

Sunsynk and Solis are both reliable inverters with “Made in China” user interfaces. Sunsynk seems to be the popular choice these days. This market has moved a lot in recent years. 5-years ago you’d struggle to find a hybrid inverter that could charge quicker than 2kW.

[AE-NMidlands]

That'll make a fair improvement in heat retention.

and preventing it turning into a furnace overheating in summer...

[Fintray]

That'll make a fair improvement in heat retention.

and preventing it turning into a furnace overheating in summer...

Not usually a problem up here!

What did you use to cut the plaster as it looks pretty neat?