The inverter will be 8kW so that limits the output too, voltage peaks around 248 and lows of 243 so should be good.
Was 99% on the Sunsynk 8 ke due to the charge/discharge current of 190 amp max just incase the cheap slots get reduced all the info about their app being rubbish is stopping me, also looking at a Solis 8kW now but need to compare
Insulating Timber Garage
Re: Insulating Timber Garage
Solid insulation, cut, foamed and foil taped.
Sheep wool insulation in the cheeks
Re: Insulating Timber Garage
That'll make a fair improvement in heat retention. 
3.87kWp PV
10.24kWp PV SolarEdge system
Tesla Powerwall 2
MK2 PV router DHW diverter
Morso 5kW WBS
Vaillant AroTherm 10kW ASHP
Nissan Leaf
10.24kWp PV SolarEdge system
Tesla Powerwall 2
MK2 PV router DHW diverter
Morso 5kW WBS
Vaillant AroTherm 10kW ASHP
Nissan Leaf
Re: Insulating Timber Garage
Yep, hope so, back of cigarette pack about 4 times better than original.
Just making improvements as and when i can.
Just making improvements as and when i can.
Re: Insulating Timber Garage
If your grid voltage doesn’t go above 243V then you’re golden!AGT wrote: ↑Wed May 21, 2025 8:32 pm The inverter will be 8kW so that limits the output too, voltage peaks around 248 and lows of 243 so should be good.
Was 99% on the Sunsynk 8 ke due to the charge/discharge current of 190 amp max just incase the cheap slots get reduced all the info about their app being rubbish is stopping me, also looking at a Solis 8kW now but need to compare
Sunsynk and Solis are both reliable inverters with “Made in China” user interfaces. Sunsynk seems to be the popular choice these days. This market has moved a lot in recent years. 5-years ago you’d struggle to find a hybrid inverter that could charge quicker than 2kW.
12x 340W JA Solar panels (4.08kWp)
3x 380W JA Solar panels (1.14kWp)
6x 2.4kWh Pylontech batteries (14.4kWh)
LuxPower inverter/charger
(Artist formally known as ******, well it should be obvious enough to those for whom such things are important.)
3x 380W JA Solar panels (1.14kWp)
6x 2.4kWh Pylontech batteries (14.4kWh)
LuxPower inverter/charger
(Artist formally known as ******, well it should be obvious enough to those for whom such things are important.)
-
AE-NMidlands
- Posts: 2292
- Joined: Wed Jun 02, 2021 6:10 pm
Re: Insulating Timber Garage
and preventing it turning into a furnace overheating in summer...
2.0 kW/4.62 MWh pa in Ripples, 4.5 kWp W-facing pv, 9.5 kWh Givenergy batt
30 solar thermal tubes, 2MWh pa in Stockport, plus Congleton and Kinlochbervie Hydros,
Most travel by bike, walking or bus/train. Veg, fruit - and Bees!
30 solar thermal tubes, 2MWh pa in Stockport, plus Congleton and Kinlochbervie Hydros,
Most travel by bike, walking or bus/train. Veg, fruit - and Bees!
Re: Insulating Timber Garage
Not usually a problem up here!AE-NMidlands wrote: ↑Thu May 22, 2025 7:06 pmand preventing it turning into a furnace overheating in summer...
What did you use to cut the plaster as it looks pretty neat?
3.87kWp PV
10.24kWp PV SolarEdge system
Tesla Powerwall 2
MK2 PV router DHW diverter
Morso 5kW WBS
Vaillant AroTherm 10kW ASHP
Nissan Leaf
10.24kWp PV SolarEdge system
Tesla Powerwall 2
MK2 PV router DHW diverter
Morso 5kW WBS
Vaillant AroTherm 10kW ASHP
Nissan Leaf
Re: Insulating Timber Garage
Indeed cooling for the 2 weeks a year we need it is also a factor( however the heat will be what swings SWMBO to an A2A pump in a few years
Lath cut with dewalt multitool. By far the best tool for cutting lath and not damaging the surrounding area.
The exposed edge will get some PVA mix to stabilise the cut so that when the plastering takes places it doesn’t get on the finish.
Easy night tonight moving some 900x1800 plasterboard from the garage to the bedroom, deliberately using smaller sheets for manhandling around rooms, staircase etc
Lath cut with dewalt multitool. By far the best tool for cutting lath and not damaging the surrounding area.
The exposed edge will get some PVA mix to stabilise the cut so that when the plastering takes places it doesn’t get on the finish.
Easy night tonight moving some 900x1800 plasterboard from the garage to the bedroom, deliberately using smaller sheets for manhandling around rooms, staircase etc